Electronics Forum | Wed Aug 19 01:55:18 EDT 2020 | unsung
Hi Jon this marlon Reach out to me to my email marlonquiroz84@gmail.com So I can send you some pics of what could be your error issues. Thanks Marlon
Electronics Forum | Wed Aug 26 07:24:29 EDT 2020 | sarason
Have you tried this solution https://www.ebay.co.uk/itm/SAMSUNG-CP30-VME-10-DPRAM-REV-001-03-I-O-BOARD/173217871888 sarason
Electronics Forum | Tue Jul 21 20:39:42 EDT 2020 | jmelson
Yes, but they really only seem to be interested in dealing in PPM-refurbished Quad IV C machines. They will sell parts but don't seem to be very interested in supporting other models under the Quad label. (The QSA-30 was made by Samsung, but uses Q
Electronics Forum | Wed Sep 26 15:04:09 EDT 2012 | kahrpr
The QSA30 is basically a Samsung CP40 with a few changes. For an older machine the programming is pretty good. it can do array boards and has an import feature for XY data. Tts been about 7 years since I ran one. Its a pretty solid machine.
Electronics Forum | Mon Dec 17 09:59:50 EST 2018 | crstarr
Hello - We have two Quad QSA-30As that won't boot. These two machines haven't been run since October (they are backup machines), and there were some heavy lightning storms that month. We think both mother boards may have been zapped. We replaced
Electronics Forum | Mon Aug 17 15:19:16 EDT 2020 | jmelson
I have a (new to me) Quad QSA-30A that I just got about a week ago. At first, I could get it to go ready most of the time, now it will never go ready. I have traced the ready button into the DPRAM board and the logic is OK all the way into one of t
Electronics Forum | Thu Jul 01 11:10:02 EDT 2004 | mfoster
Hi, Samsung has V 5.401 MMI posted on their site at http://www.samsung-smt.com under model CP33. You must register with your serial number, but there is no cost. Please let me know if you have any problems at mike.foster@DynatechSMT.com. Good luc
Electronics Forum | Tue Apr 10 11:36:46 EDT 2007 | Pro 2000 inc.
Hi there, I recently bought a used Samsung CP30V placement machine witch is about the same machine as a Quad QSA30V. We need to replace some defective nozzles, add some feeders and find spare parts. Where should I look for to get all of these. We tr
Electronics Forum | Mon Jan 07 07:05:19 EST 2008 | PitPony
In the next couple of weeks I will be attempting to place 0402's and 0603's using a Quad QSA-30. I am a little nervous as I have heard along the grapevine that the machine struggles in placing the smaller components as they float around in the pocke
Electronics Forum | Mon Jul 09 11:52:21 EDT 2012 | bobpan
Does it show the ANC in a position on the feeder base in the screen that has the nozzles/hole positions? When you go to optimize ...there is a screen that has something to do with registered ANC.....There could be something there that is incorrect. I
winsouce.jpg)
