Electronics Forum | Fri Feb 19 15:23:31 EST 2016 | ttheis
RESOLVED I adjusted the "Minimum Board Width" in the Board Handling Configuration to resolve this issue. I set the lane width to a larger value which did not hit the front limit and measured the difference between the actual lane width and the set l
Electronics Forum | Thu Sep 04 13:09:27 EDT 2008 | realchunks
This is fine from a quality engineers point of veiw, but as you said the vendor never admits to nothing. So the company that has the problem has to resolve the problem for themselves. Generally this turns into a finger being pointed at the process
Electronics Forum | Fri Oct 09 16:07:30 EDT 2009 | dlabelle
We use Dow 2620 silicone conformal coat applied with PVA1000 sprayer machine. If used on a daily bases, we have no problem. If we let the machine sit idle for over a week, we will get bubbles in the conformal coating. Sometimes, purging the line w
Electronics Forum | Wed Aug 23 18:04:28 EDT 2000 | JAX
Sarry, Not to sure what your asking but here's an idea. step 1: If you can change vendors: change vendors. step 2: If you cannot change: Show them your problem. If nothing gets resolved, work on step 1.
Electronics Forum | Wed Jun 20 15:56:33 EDT 2001 | Gil Zweig
For the applications you mention you would probably want to resolve details of at least 8 microns (0.0003") which would translate into a bare minimum resolution requirement of 60 to 100 line pairs per millimeter at a minimum geometric magnification o
Electronics Forum | Wed Sep 29 14:30:58 EDT 1999 | Clifford Peaslee
Hello all, There was a problem with the web email system, and it has not been distributing emails properly since Sept 25. It is now fixed, and the awaiting emails have been distributed. Sorry for the inconvenience, Cliff
Electronics Forum | Fri Jul 16 08:25:20 EDT 1999 | Clifford Peaslee
Hello Everyone, We have encountered problems with the base cold fusion language on the server, and we are still trying to resolve it. The site may be down periodically today while we isolate and fix the problem. Thanks for your patience, Cliff
Electronics Forum | Thu May 06 12:59:42 EDT 1999 | Clifford Peaslee @ SMTnet
We have been experiencing problems with our web server recently, and has caused periodic slow downs. We are working hard to resolve this issue, and it is our #1 priority. Sorry for the inconvenience, and thanks for your patience, Cliff
Electronics Forum | Fri Feb 26 15:44:19 EST 1999 | Cunli
Dave, Cliff will be contacting you shortly to understand and resolve the problem. Thank you for your patience. Cunli | Cunli: Registration keeps "booting" me back to the start of restration, because the very nice program doesn't accept any type o
Electronics Forum | Thu Nov 12 09:31:20 EST 1998 | Clifford Peaslee @ SMTnet
I have fixed the spontaneous page loading problem with the error of "locked by admin". It is possible to still receive the error, but it is much less likely now. If you still receive the error (or any errors) send an email with the page contents to
.gif)
winsouce.jpg)
