Electronics Forum | Thu Sep 29 05:37:56 EDT 2005 | dougs
for 0402's you should be able to run the turret at full speed, if you need to slow it down it means that your machine isn't set up properly. use the vision number that the manual tells you and make sure your feeders are properly calibrated, poorly c
Electronics Forum | Thu Sep 08 03:18:10 EDT 2005 | dougs
Don't know if you'd be able to register as i'm not sure if you need to have a service contract or not but if you can go to the UIC website and register for the knowledgebase, this service has detailed advice on fault finding on universal machines, i'
Electronics Forum | Thu Sep 08 09:41:51 EDT 2005 | PWH
If you do find your camera is bad, I think they are relatively easy to replace if you get a new one. I have done a 1.0 and 4.0 GSM camera replacements but not a PEC as of yet. If it's like the 1.0 and 2.6 and 4.0's, likely it is not tough but will
Electronics Forum | Fri Sep 09 06:08:39 EDT 2005 | geb
I think it may be the card thats causing the problem. When both machines are set to display a live image, the faulty machine shows pink/red. When their cables are pulled out of the card the working machine shows grey/noise and the faulty machine stay
Electronics Forum | Fri Sep 16 09:39:15 EDT 2005 | electromek
We had some defective camera's on our GSM's. The repair guys wanted $12,500US for two replacements from UIC. I found rebuilds at this place in New York State for $249 each. They have been working great for two years now. I even got back $30 for the o
Electronics Forum | Thu Sep 22 18:15:51 EDT 2005 | PWH
Does anyone have experience using a shuttle on a GSM platform? I'm just wondering how well it works and how reliable and trouble free the component picks are. I am looking to run a low volume line with a printer/oven and a GSM1 platform with a PTF
Electronics Forum | Fri Sep 23 09:53:33 EDT 2005 | PWH
Thanks all for the opinions. Our shuttle/GSM1/PTF install was done by an ex-UIC engineer. Have never utilized shuttle so appreciate the advice on pros and cons of it all. We have 1.0 mil on PTF side and 4.0 on shuttle side. C4 head on both sides
Electronics Forum | Fri Oct 14 15:44:30 EDT 2005 | fastek
Yes....interesting. Word is this better be successful for them or they are done. At first glance my issue would be what impact do solder paste "dots" have in the following areas compared to stenciled paste: 1) Controllable with regards to volume 2
Electronics Forum | Thu Oct 20 12:50:11 EDT 2005 | bobl
I used to collect mine in a 50 gal drum and take them to the scrap dealer. If he classifies it as brass or copper you can get a good return. Most leads are nickel and tin plated brass. Most dealers stick a magnet on it and tell you its not worth much
Electronics Forum | Fri Oct 21 08:03:40 EDT 2005 | Mike
Hello Darby, because of the machine configuration it depents very strong on the feeder configuration and on the board if the 3 heads more give you so much more CPH. Realistic it will only be 1-2000 CPH more in realistic operation. On the other hand
