Electronics Forum | Fri Apr 27 12:41:41 EDT 2018 | irc
Thanks for the answer, but the problem is the blue button is tur on all the time and I need turn of for work whit the oven. Best Regards.
Electronics Forum | Sun May 06 21:06:59 EDT 2018 | jimpat
Thanks for the feedback. I was looking into solder pastes and saw some advertised specifically for low voiding by Indium and another supplier. This is customer driven - requesting voids in the single digit percent for components with thermal pad
Electronics Forum | Fri Jun 01 14:13:50 EDT 2018 | jsmith01
Does anyone have a good supplier of High Temp Chain Oil for a reflow oven in the United States?
Electronics Forum | Sun Jul 22 11:53:41 EDT 2018 | lnaiduch
I need the software for a Vitronics SMD 522 oven. I contacted the people from Vitronics but they could not help me. Can anybody help with this software? Thanks a lot.
Electronics Forum | Wed Nov 21 05:57:30 EST 2018 | premkumar_haribabu
Hi Robl, Thanks for your qucik reply!! , i understand if we use aggresive flux that we can impove solder wetting over nickel plate vs PCB pads & we need to solder through 12 zones reflow oven. Prem
Electronics Forum | Mon Dec 03 08:57:14 EST 2018 | robl
Sounds like bent rails. Do you have a laser pen you can shine down both sides of both rails to see if there is any curve?
Electronics Forum | Mon Dec 03 15:16:18 EST 2018 | emeto
Ideally size should be the same all across - parallelism. If you see different you should fix it. I would suggest instead of measuring it, to use a huge PCB and move it all the way to prove rails are in parallel.
Electronics Forum | Wed Jan 09 14:43:28 EST 2019 | SMTA-Andy
Would like to get feedback on realignment of an SMT line with loader/unloader, printer, p&p and 16' oven. What tech would be good to use if doing it ourselves? (Lasers, etc?) What companies can be recommended for a professional job?
Electronics Forum | Wed Feb 13 09:37:01 EST 2019 | SMTA-Joe
I will look into using an oven to raise the module's temp when I have the chance. This could be our only way to use existing technology that only allows for temps below what we're seeing.
Electronics Forum | Sat Apr 13 20:23:41 EDT 2019 | kylehunter
The 1500 is rated for up to 300c. So it shouldn't have a problem with lead free right? http://www.petlock.com/data/Heller_1500_specs.htm
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
4 Vreeland Rd.
Florham Park, NJ USA
Phone: 973-377-6800
