Electronics Forum | Tue Nov 13 21:53:55 EST 2007 | molos21
I have been using sn100c for over a year now on our wave solder process and I am plenty satisfied so far. The secret for success with this alloy is to have your solder pot near 270 celsius and your dwell time has to be near 4 sec and your temperature
Electronics Forum | Thu Dec 11 07:29:58 EST 2008 | jdumont
I have done a few studies on this issue here. As a result we have increased hole diameter on heavily ground planed pins to a min of .015" over the lead diameter as well as preheating the PCB when hand soldering. I have also had to order the upper pre
Electronics Forum | Thu Jan 28 09:45:44 EST 1999 | parag
| | i am working with the noclean process and getting white residues on the bottomside of the board probably due to the | | wave soldering flux.i am using a no-clean solder paste and a noclean wave solder flux.The boards passed the accelerated tempe
Electronics Forum | Sat Jul 25 01:15:54 EDT 1998 | Chiakl
| | I was wondering how successful industry has been in quantifying relationships between defects rates of particular solder problems (like bridging, opens,..) and PCA design parameters (like spacing, part orientation, pad dimensions, ...). For wav
Electronics Forum | Mon Jul 27 13:49:53 EDT 1998 | Ted
| | | | I was wondering how successful industry has been in quantifying relationships between defects rates of particular solder problems (like bridging, opens,..) and PCA design parameters (like spacing, part orientation, pad dimensions, ...). For
Electronics Forum | Mon Sep 27 11:10:52 EDT 2004 | grayman
First, Your flux is no good replace it. second, Check for pre- oxides. The smaller the component or the leads makes it difficult to solder specially if it has oxide. Thrid, check the board to wave parallelism. Maybe your wave is not parallel to the b
Electronics Forum | Wed Dec 21 06:51:48 EST 2005 | aj
Hi all, I have an Electrovert Econopak Plus wave solder machine. Lately the solder pot temp has been fluctuating +/-10 degrees c. I have replaced the thermocouple as I suspected it to be faulty but the problem still exists. I am confident that the
Electronics Forum | Tue Feb 28 17:22:23 EST 2006 | dave
All, I am currently trying to run a quantity of boards thru my wave machine but I am having serious issues with hole-fill or lack of aswell as others. The boards are HASL finish and due to materials issue they have been waiting for Wave Solder Proce
Electronics Forum | Wed Apr 20 14:32:34 EDT 2011 | cbeneat
Hi all, A quick question to see if anyone can solve my issue. We are having problems with a particular board we run through our wave solder on a pallet. The board is populated with about 20 fuse clips, and one clip on almost every board gets fille
Electronics Forum | Mon Jun 14 12:11:54 EDT 1999 | Earl Moon
| We are a medium sized PCB assy. house manufacturing about 2000 motherboards a day. There is a major problem we are facing at the wave soldering stage, i.e. warpage of the PCB. As soon as the PCB touches the wave it warps severely from the centre
Buyer, Seller, Broker of Electronic Assembly Equipment
Equipment Dealer / Broker / Auctions
309 West Pickle Alley
Rushford, MN USA
Phone: 507-864-7477