Electronics Forum | Tue Oct 09 16:25:26 EDT 2001 | meowen
Unfortunately 95% of our runs require both sides of our Universal HSP's. We also have carts that hold one carriage worth of feeders on each side. Parts that carry over from one product to the next are flagged and relocated in the machine per the ne
Electronics Forum | Wed Oct 17 12:27:57 EDT 2001 | nifhail
Can anyone share with me the best timing for the escalation process, let it be either equipment downtime or process downtime ? Our SMT line is really up to the throat. I used to hv an escalation process like, say if the printer down, the machine will
Electronics Forum | Wed Dec 05 20:51:36 EST 2001 | davef
Mydata [http://www.mydata.se/] makes excellent placement machines with some unique features. They are: * Tailored high mix, high part count, fast turn production. * Not aimed a low mix, chip pukin� production. * For BIG butt boards. Aegis works fin
Electronics Forum | Fri Jan 04 15:47:27 EST 2002 | nwyatt
As mentioned before, it really does depend on the type(s) of machines you are using. Unicam and Fuji teamed up to bring us Fujicam, which is geared towards Fuji machines, but will also work with Panasonic, Universal, and (I think) Siemens. It has a
Electronics Forum | Wed Jan 16 15:23:11 EST 2002 | dougt
You sound like your set to go with MyData. If you still have some time look at what Contact Systems has. Their older machines were slower compared to what is out there but they are awesome prototype machines (write a quick program, run a couple of
Electronics Forum | Wed Jan 16 15:13:24 EST 2002 | dougt
The Industry has just come out with some standard that includes a "test board" that will be used to compare one machine to another (we have been refering to it as an IPC board). The board has components spaced from a smaller to larger pattern and at
Electronics Forum | Tue Mar 26 13:31:11 EST 2002 | pteerink
bought a line from an American company once. You couldn't miss it, all the machines were plastered with "Made with Pride in the USA" stickers. Was a great show of nationalism, stickers were nice and shiny too. Too bad the machines didn't work when
Electronics Forum | Thu Mar 21 15:00:31 EST 2002 | stefwitt
it became quite popular to ask for a so called licensing fee from the supplier. Without, you will not get serviced. You will have to add this to the cost, if you don't buy from Fuji and require spare parts. If the machine can be demonstrated from th
Electronics Forum | Mon Apr 01 09:39:35 EST 2002 | stefwitt
Improving the control process may be not top priority of the machine vendors. In the mean time, investigate how the operators make these errors: Are the same part numbers on the reel, or do you have to use the BOM to translate the part number on the
Electronics Forum | Sat Apr 06 07:44:26 EST 2002 | yngwie
Dave, thanx for your input. Its really helps. Just need some clarifications on : 1) Consider evaluating chimney versus programmable / conveyored machines separately. Question: is there any disadvantages of the programmble/conveyored vs chimney ?
Buyer, Seller, Broker of Electronic Assembly Equipment
Equipment Dealer / Broker / Auctions
309 West Pickle Alley
Rushford, MN USA
Phone: 507-864-7477