Electronics Forum | Tue May 09 21:56:22 EDT 2006 | KEN
Yes. Teach 24mm feeder. 1. Set pickup to "Teaching" or "relative". 2. Adjust coordinate. 3. Celebrate with high fives and chest bumps like in the beer comercials.
Electronics Forum | Fri May 12 09:56:29 EDT 2006 | JB
have you ever thought about teaching the feeder as a repeat pickup? 1st before the sensor and 2nd at the sensor.
Electronics Forum | Tue May 23 08:43:32 EDT 2006 | Rob
Go to Slaine's 2nd link, then right click on the PDF icon & do a "save target as". Took about 30 seconds. Didn't work the other way. Cheers Slaine, Rob.
Electronics Forum | Mon Jun 12 14:33:40 EDT 2006 | pjc
IPC spec is V-score shall not be more than 1/2 board thickness. They should be V scoring 1/4 off top and 1/4 off bottom equally.
Electronics Forum | Mon Jun 12 16:33:39 EDT 2006 | muse95
Which spec is that in? I'm seeing web thicknesses of .015 or thinner being suggested for a .062 board, way thinner than 1/2 the board thickness.
Electronics Forum | Mon Jun 19 18:17:43 EDT 2006 | PWH
We are now running SMT ROHS assemblies. We are losing some upside down parts in the reflow oven when running the 2nd side. These are parts that do not fall off the leaded version. Anybody else having problems with this? What are you doing to stop
Electronics Forum | Fri Jun 30 09:10:12 EDT 2006 | andyspaziani
We are having continual QuadAlign issues with a 1997 vintage QSP2. Every part on the machine has been replaced� now they want to replace the entire head on gantry one. Does anyone have any experience in this area? Sincerely, Andy Micro Air, Inc.
Electronics Forum | Mon Jul 10 08:58:37 EDT 2006 | andyspaziani
Error we get is quadalign. Calibration is good. Signal for this head appears better than #2 which works fine. As soon as 1 picks up the first part we get quadalign error. Thanks for any help you may have. Andy
Electronics Forum | Tue Feb 20 20:07:33 EST 2007 | mdang
My machine TP9-2U have the same problem. I use the camera to walk through the program and it is off and not repeatable. I think the machine has backlash but I don't know how to tighten it up. Can you help??? Thanks, -Michael
Electronics Forum | Tue Feb 27 21:20:23 EST 2007 | mdang
This is the TP9-2U machine and have about 2000 hours on it. When I used the camera to walk through the program, it is not repeatable.