Electronics Forum | Thu Aug 12 22:26:24 EDT 1999 | Dave F
| | | Q.C. manager asking me about spc's for Mydata Pick & Place. | | | Other then Visual inspection, is there other ways to automate | | | placement inspction? | | | | | | Thanks | | | | | Sure! There are a few automated vision systems available
Electronics Forum | Thu Aug 12 22:31:10 EDT 1999 | Dave F
| Hello, | | Can any netters suggest what critical parameters should be considered & what are there assoicated impacts for a solder paste printing process ... | | B.Regards, | Felix | Felix: There are some 30 variables that affect SMT solder qua
Electronics Forum | Thu Aug 12 22:23:23 EDT 1999 | Dave F
| | | | (snip) | | | | | | You're quite right. However, anyone who uses MeCl in an aerosol spray needs his head examining. I'll go further: if he continues, he will most CERTAINLY need his head, the rest of his CNS and his liver examining a little
Electronics Forum | Thu Aug 05 10:46:20 EDT 1999 | Dave F
| We are installing a new reflow oven and I have been told that we do not need to vent the exhaust out through the roof since we have a false ceiling. All that is required is to vent above the false ceiling and that the air exchange is great enough t
Electronics Forum | Wed Aug 04 21:52:54 EDT 1999 | Dave F
| We're getting field failures in a high impedance portion of the circuit. Think the unpopulated pc card has contaminates because we were able to grow dendrites by applying a 9 volt battery across the suspected pad, placed a drop of de-ionized water
Electronics Forum | Tue Aug 03 13:03:20 EDT 1999 | Dave F
| | I have been asked to supply a maximum shelf life for our assemblied PCB's. I realise this is dependent on so many factors- temperature, humidity, no of layers etc. But does anyone have a formulae for calculating shelf life, or does anyone know of
Electronics Forum | Tue Aug 03 13:03:48 EDT 1999 | Dave F
| | I have been asked to supply a maximum shelf life for our assemblied PCB's. I realise this is dependent on so many factors- temperature, humidity, no of layers etc. But does anyone have a formulae for calculating shelf life, or does anyone know of
Electronics Forum | Wed Jul 28 20:56:58 EDT 1999 | Dave F
| Currently, we are baking any PCB before process on SMT, the 'reason' is to dry any possible humidity that could be inner the PCB, it does not matter if the PCB is multilayer or not. We bake PCB's at 107C for 4 hrs and the board must be process into
Electronics Forum | Thu Jul 29 00:23:45 EDT 1999 | ScottM
| Currently, we are baking any PCB before process on SMT, the 'reason' is to dry any possible humidity that could be inner the PCB, it does not matter if the PCB is multilayer or not. We bake PCB's at 107C for 4 hrs and the board must be process into
Electronics Forum | Thu Jul 29 12:33:38 EDT 1999 | Wolfgang Busko
| Currently, we are baking any PCB before process on SMT, the 'reason' is to dry any possible humidity that could be inner the PCB, it does not matter if the PCB is multilayer or not. We bake PCB's at 107C for 4 hrs and the board must be process into
