Electronics Forum | Thu Oct 09 15:26:08 EDT 2008 | wrongway
We use campton tape also but we use a ultasonic stencil cleaner and the tape will come off everytime its washed good luck
Electronics Forum | Tue Oct 07 05:52:04 EDT 2008 | benefon
Hi Perhaps you could modify the PCB Origin coordinates in the PCB Info. Change the PCB Origin X and Y coordinates to point to the PCB origin on the fixture. rgds AR
Electronics Forum | Wed Oct 08 00:44:19 EDT 2008 | darby
Lock the pcb in the machine with the fixture. Teach origin 0 (O0,the datum origin or pcb origin). That's the only data you change.
Electronics Forum | Thu Oct 09 11:57:14 EDT 2008 | hussman
Why not build with a leaded paste or solder pot? You'll have more than 3% lead after solder. Who cares about before solder - any testing will be done on the finished product.
Electronics Forum | Thu Oct 09 22:57:10 EDT 2008 | dphilbrick
Customer Specification, parts must be certified to have no less than 3% lead content on the lead prior to attach! It's a Hi Rel Mil Spec FAR Clause in the RFQ.
Electronics Forum | Wed Oct 08 12:49:37 EDT 2008 | leemeyer
When in the fiducial teach screen check to see if the "Fiducial Data from Autoprogram" box is checked. If this program was not generated from Autoprogram this box should not be checked.
Electronics Forum | Wed Oct 08 13:30:04 EDT 2008 | bobpan
You need to check and see what you have 'y' set to in teach fiducials. Make sure you have only 1 with a 'y'(panel or multi-image fids)....then teach the appropriate one.
Electronics Forum | Wed Oct 08 14:20:34 EDT 2008 | sambolian
I only have 'Y' in the "Global Fiducial Correction" box , but it still gives me the error of "Fiducials not taught". Any more suggestions?
Electronics Forum | Wed Oct 08 14:30:42 EDT 2008 | leemeyer
Was the board programmed using Autoprogram or did you hand program it? What version of Central Controller are you running.
Electronics Forum | Wed Oct 08 15:46:41 EDT 2008 | bobpan
ok....couple of other questions first......does your machine say MVS when entering into central controller? After you teach your fiducials...Are you entering out of the screen....if you hit escape it doesnt save what you have done.