Electronics Forum | Fri Aug 21 16:15:09 EDT 2009 | drakealvarez
Define "good price". Throw out a number. Good price - One feeder around $2,000.00 & under if possible would help very much. -Aortiz
Electronics Forum | Tue Aug 25 16:35:36 EDT 2009 | drakealvarez
Universal G.S.M. single beam, head A1 (four spindle) -Aortiz
Electronics Forum | Tue Aug 25 18:25:15 EDT 2009 | swag
If you have access to a machine shop you can build your own easily using the same bolt/tooling pin pattern as tracks. Place them on a vibratory track base and disconnect or turn the vibe down.
Electronics Forum | Sat Aug 15 06:29:40 EDT 2009 | abeasia
Help, experiencing discolor of a white solder resist paint after reflow of 250 degree, it turned yellow. Have tried many paints, no luck. Anyone knows one that wouldn't change color and holds the white nicely? Thanks for your support in advance.
Electronics Forum | Sun Aug 16 19:46:48 EDT 2009 | abeasia
Hi Dave F. Thanks for the suggestion, will give it a try. With Appreciation, ABE.Asia
Electronics Forum | Sun Aug 16 04:47:43 EDT 2009 | zhengjb
Any acceptance criteria for hot bar soldering finishing? e.g. IPC-A-610? or anything else?
Electronics Forum | Tue Aug 18 16:32:25 EDT 2009 | ldavis
Sergey, Try increasing the cool down time if that is a recipe option. We have witnessed the same effect on components that have rather slow cool down rates and were able to eliminate the problem by extending the cooling time.
Electronics Forum | Tue Aug 18 17:40:52 EDT 2009 | jlawson
Is the mechanics ok with the raising and lowering into the vapour ie no small movements that could be moving the part ? Most Vapour Machines have a lower and raise mechanisim so movemnt of parts can happen if not smooth, especially when coming out o
Electronics Forum | Wed Aug 19 16:07:58 EDT 2009 | davef
We don't know dip about vapor phase soldering, but we can't help but wonder how well the leads of the component match with the pads on the board.
Electronics Forum | Thu Aug 20 04:37:03 EDT 2009 | sergey2007
Hi, I also paid attention on the solder balls.. I thought it was because of the pop-corning, but the customer told me the component was not damaged.. Regarding the bunch of tented vias, I need to ask the customer about that. Probably, they have unpo
