Electronics Forum | Mon Apr 26 03:00:43 EDT 2010 | fujiphil
Check the following... 1. Set the fiducial reading to SCAN... 2. Clean the half mirror of the fiducial camera... 3. Check the CCD Camera...maybe blown fuse inside. Hope this will help.... Good luck....
Electronics Forum | Mon Apr 26 15:52:11 EDT 2010 | markhoch
If the above recomendations do not help...(I'd try them first) Did you try the infamous "Fuji Fix"? Power the machine all the way down and power it back up. (Rebooting the software)
Electronics Forum | Sat May 08 07:03:31 EDT 2010 | aj
From looking at your images I would say it could be poor solderability on the terminations of the component itself. Can you get your hands on a different date code and try them out?
Electronics Forum | Tue Apr 27 18:33:35 EDT 2010 | smt_guy
what IPC Standard do I need in designing RF Boards that pertains to PCB Layout, Conductor width and spacings, Trace thicknesses etc... thanks and best regards,
Electronics Forum | Tue Apr 27 20:12:42 EDT 2010 | davef
Look here: http://www.ipc.org/4.0_Knowledge/4.1_Standards/SpecTree.pdf ... that would get you to IPC-2252 - Design Guide for RF/Microwave Circuit Boards. Admittedly, it's not a standard, but that's what you get.
Electronics Forum | Wed Apr 28 16:30:04 EDT 2010 | cusackmusic
We use Quad IICs, and IVCs and love them. They can be expensive to fix, but they are pretty reliable. I think PPM is releasing Windows software for their rebuilt machines, although I think it was going to be exensive. Maybe they give it away with
Electronics Forum | Thu Apr 29 15:47:44 EDT 2010 | smtmax
contact me at vee@smtmax.com. I can be your solution to what you need! Vee
Electronics Forum | Wed Apr 28 14:52:03 EDT 2010 | davef
When we hear the words 'flexible circuit' and 'delamination' in the same sentence, we think: * Excessive reflow temperature. * Entrapped moisture. Boardhouse: I hope this is a step towards redemption.
Electronics Forum | Thu Apr 29 15:34:40 EDT 2010 | bradlanger
Does anybody know where you can get Canada Bolson Oil or Suitable alternative that is optically clear to test the plating in a PTH for outgassing?
Electronics Forum | Thu Apr 29 20:06:20 EDT 2010 | davef
We could never find that stuff either. Must be from some Euroland source. As an alternative, try: Cedarwood immersion oil [Fisher Scientific, S79956]