Electronics Forum | Thu May 12 01:24:06 EDT 2022 | mikevb
Interesting. I will replace that cable and see what happens. I suppose there is a lot of movement it has to endure.
Electronics Forum | Tue Dec 13 19:42:11 EST 2022 | duro
Hi ProcEng1, I have no clue what removable hard drive adapter you mean. I have 2.5" SSD hard drive connected directly to PC board by regular Sata cable.
Electronics Forum | Fri Feb 16 17:04:17 EST 2024 | jborrelli76
Thanks, will do. The point that's odd is one side functions. I think there may be a cable that causes each bank to clamp that may be broken. Time to get my hands dirty...
Electronics Forum | Wed Mar 27 02:36:27 EDT 2024 | dekhead
DEK 265LT was not mfg until 1995/6, verify model; what camera (4 possibilities on LT) is on machine? Have you verified / replaced video cable from camera all the way back to cognex?
Electronics Forum | Mon Mar 03 12:25:37 EST 2008 | daxman
The problem was first noticed while doing a nozzle center. The wide angle camera would not display an image. After rebooting the machine (sometimes it took several tries) the camera would work. A few months later, the wide camera would not boot at a
Electronics Forum | Fri Jan 23 15:38:31 EST 2004 | vickt
Andreas, Depending on what model of HSP you have the answer can be different. I'm guessing you may have a 4790 or 4791. If this is the case you may need a SMPI-SMEMA conversion box as you have indicated. Also note that there is a specific "upline
Electronics Forum | Thu Mar 25 11:19:11 EST 2004 | paul_bmc
Thanks for the informative posting.. When I power up the machine this is what I get.. 1. The movable cutter does not actuate the cutter knifes. (The head still jogs 360 and the movable cutter moves in the linear axis but the c&c motor does not act
Electronics Forum | Wed Aug 03 10:35:06 EDT 2005 | Wonderboy
Wait. I think you need to add that any product sold in EUROPE needs to be lead-free by July 1st, 2006. And let's clarify further. Lead is just one of numerous elements that will be restricted. In fact, quoted directly from the directive: "Member Stat
Electronics Forum | Thu Dec 28 16:17:23 EST 2006 | joey_dragon
Good tidings, all. I am looking for a machine that will allow us to mount a flat flexible strip (such as TennRich's B.Type) to a row of pads on a PCB. I have not much knowledge about the process, I guess I expect to see a machine with some hot bar.
Electronics Forum | Thu Mar 26 11:29:31 EDT 2009 | cyber_wolf
I talked to Mydata service (briefly) 3 times. Halfway through the 3rd call it was suggested to me that we set up a service call. Times being what they are, we are not willing to go that route yet. Thankfully we are not in dire need of this machine ri