Electronics Forum | Fri Jan 21 19:55:52 EST 2011 | wingding
Hello, We have an MCS-30 with a 3.5 floppy drive. But we cannot copy programs to it if the program names are longer than 8 characters. Does anyone know how to change this to a higher number? Thank you.
Electronics Forum | Tue Jan 25 04:27:39 EST 2011 | ghcarnu
Hi, We used Abzol for cleaning the smt assembled boards; now this solvent is not available any more in Europe. Does anyone knows a replacement for this solvent ?
Electronics Forum | Tue Jan 25 17:56:14 EST 2011 | austinpeterman
We have a SMT600-CL Aqueous Cleaning System. I am under the impression we are overpaying for the recharging service. Currently, we ship the tanks from Texas to California to have the recharging service performed. Is there a company in the Dallas a
Electronics Forum | Wed Feb 16 02:13:13 EST 2011 | vinitverma
Hi Mark, Send me your mail id and I'll send you the very detailed procedure. If you follow to the letter, you'll have a perfectly calibrated machine. You can write to me at vinit.verma@prosemtechnology.com Regards Vinit
Electronics Forum | Wed Jan 26 13:54:28 EST 2011 | cduarte
Does anyone know of a thirdparty yestech rep out there? We just bought a used machine and are unable to make it operational.
Electronics Forum | Sat Jan 29 18:04:30 EST 2011 | rway
Harley Cole Tool Technology work: 636-946-0226 Cell: 314-374-8262 Email: hgcole@tooltechnology.net Website: http://www.tooltechnology.net
Electronics Forum | Fri Feb 04 16:07:38 EST 2011 | pjc
If your peak temps in profiling the Sn/Pb solderpaste are 210C-215C, then no, you will not "weld" to the SN100C finish. SN100C is liquidus at 227C, too hot for most Sn/Pb solderpastes.
Electronics Forum | Fri Jan 28 19:26:51 EST 2011 | jlawson
Milara has a combined Stencil printer + jet Printing ??? Print and then jet print areas not printed or top up prints.
Electronics Forum | Thu Jan 27 09:32:54 EST 2011 | oangulo
Could somebody tell me what could be causing my Contact 3AV-100 machine is showing the message "PCL-240AK position Error. Machine not hommed"? Thanks
Electronics Forum | Fri Jan 28 15:58:38 EST 2011 | oangulo
The issue was with the actuator 2. after we clean and lubricate it the issue disapear.. Thank you.
