Electronics Forum | Tue Aug 26 17:50:52 EDT 2014 | dkrawchuk
Hi, We have some boards that we apply an underfill to a BGA. Some boards have underfill that covered the surrounding passives. The customer is concerned that the different expansion rates will damage the passives. Does anyone know of a company th
Electronics Forum | Tue Sep 09 17:09:44 EDT 2014 | chemers
Thank you to all. The problem was dust in the x wagon motor. We cleaned the motor out and everything works again. Rebecca
Electronics Forum | Tue Sep 09 11:30:50 EDT 2014 | bobpan
That is funny....made my day. I have installed a lot of machines and usually use a monkey wrench and maybe a hand jack to help out.
Electronics Forum | Thu Sep 11 17:13:46 EDT 2014 | tech1
The FSE must be in great shape, for that much movement I would have had to break out my sledgehammer.
Electronics Forum | Mon Sep 15 14:38:24 EDT 2014 | rgduval
Anyone out there have a copy of a users manual for a GSM 2? I've got a machine to get running, and, while I have the software manual, something on the hardware would be useful to have. Thanks, ..rob
Electronics Forum | Mon Sep 29 11:33:01 EDT 2014 | bobpan
Check the ampifiers in the back of the machine. They should have a green led lit on them. If the light is out or a red led is lit then the amplifier is bad. good luck
Electronics Forum | Wed Oct 08 11:18:41 EDT 2014 | wavemasterlarry
If its like my wave, the t-couple might not be mounted over a whole where the hot air blow out./ mounting it on the hot plate makes it over heat alot.
Electronics Forum | Mon Oct 27 16:28:18 EDT 2014 | hegemon
Thanks to the OP for the last post, closing the issue. So many times these threads can kind of tire out, and no one ever knows what the solution to the original problem was. Of course, that's the point of these forums. 'hege
Electronics Forum | Mon Oct 20 18:58:13 EDT 2014 | warwolf
Has anyone had any products from this company? Just wanting to find out a bit more on the quality side of things. Regards
Electronics Forum | Tue Oct 21 09:36:50 EDT 2014 | island2013
Hi Bill, Yes it does have a small circuit right behind the plate. There is a 2amp fuse in there along with some other circuitry. Perhaps your fuse went out
