Electronics Forum | Sat Dec 26 12:17:02 EST 1998 | Dave F
| Any one know a good stencil vendor who can produce stencils below .002" foil with appetures at .004" on .008" pitch? AMTX use to be my vendor but they are closed down. | | Thanks, | | Chris Grendler | Chris: One source of e-formed stencils r
Electronics Forum | Thu May 13 16:25:38 EDT 2004 | pjc
Try contacting the very excellent applications engineer at Indium. His name is Dave Sbiroli, dsbiroli@indium.com or 800-446-3486 / 315-853-4900
Electronics Forum | Wed Sep 26 10:11:08 EDT 2007 | morris
Bearwear Inc. Makes the wave solder weight bags you are searching for. Lewisville Texas 972-315-6457 http://www.webspawner.com/users/bearwear/
Electronics Forum | Fri Feb 22 08:13:02 EST 2008 | davef
Try: * Grainger [www.grainger.com] * Mc Master-Carr [www.mcmaster.com] Use a blast gate like McMaster-Carr 1822K315 located on each port of the machine. These will help balance the air flow entrance to exit as well.
Electronics Forum | Wed Dec 19 09:41:14 EST 2012 | dyoungquist
What is your solder pot temperature? We found that on a 0.093" multilayer board increasing the temp of the lead free solder from 300C to 315C helped with the barrel fill.
Electronics Forum | Fri Aug 05 13:34:03 EDT 2016 | dphilbrick
Spoke the ladies here a couple years ago, they still will make them for you Bear Wear Inc. 1114 Spring Creek Lane Lewisville, Texas, 75067 USA Phone 972-315-6457
Electronics Forum | Fri Feb 03 11:47:29 EST 2017 | lleonard
Is this for a Selective Solder? If so what size nozzle do you run. I run at 315 C most of the time. You can speed up your process time and still achieve good solder fill.
Electronics Forum | Fri Dec 10 15:41:43 EST 2004 | davef
For standards: Electrostatic Discharge Association (ESDA); 315-339-6937; Fax: 315-339-6793; http://www.esda.org; info@esda.org; 7900 Turin Road, Bldg 3, Rome, NY 13440-2069 You should build your ESD program around the requirements of ANSI/ESD S20.
Electronics Forum | Fri Aug 07 11:15:15 EDT 2009 | davef
All major solder suppliers should be able to meet your stated requirements. Try: * Kester ; 515 East Touhy Ave, Des Plaines, IL 60018-2675; 847-297-1600 847-699-5548 kester.com * Heraeus Incorporated, Circuit Materials Div.; 24 Union Hill Rd, West Co
Electronics Forum | Mon Nov 20 06:51:00 EST 2000 | Daniel Carlsson
Does anyone have information regarding: -Moisture level (wt%) that may cause delamination in PCB�s. -Baking time and temperature if using a Vacuum Drying Cabinett and if using an air oven. (What I�m most interested of is Poly-Imid-Aramid.) -Are ther