Electronics Forum | Fri Jul 13 12:32:14 EDT 2007 | rgduval
We've experienced this issue with SN100. A couple of things we've tried, all with varying levels of success: 1. Longer pre-heats. We use SN100 in a solder pot, and pre-heat the boards on our wave machine. This did have a positive effect, but I ne
Electronics Forum | Mon Jul 16 08:42:14 EDT 2007 | realchunks
Hi Scott, Here is another thought. Check your wave solder machine visually. Does the wave flow on both sides of the nozzle? If not, you may have some dross build-up which may be causing your problem. Generally it will only happen on the very fir
Electronics Forum | Fri Jul 13 11:33:54 EDT 2007 | realchunks
Just starting and already responsible for product quality and machine adjustment? Wow, you poor bastard. Ok, I will assume this problem happens on the bottom side of the board with a thru-hole IC. The short occurs on the side that doesn't have the
Electronics Forum | Thu Sep 06 15:36:27 EDT 2007 | kpm135
My company recently aquired an asymtek coating machine and I have been using Humiseal 1B31, an acrylic coating, in it to coat all the boards given to me. They have now come to me and asked if it is possible to run Humiseal 1A33, a urethane coating, t
Electronics Forum | Wed Sep 25 15:58:36 EDT 2002 | bschreiber
Hello Dave, I hope that electronic slap didn�t hurt too much. Robf, I am sorry that you did not agree with my initial response, but the answer is very detailed and most of the support material I have is only in paper format so I need to either snai
Electronics Forum | Thu Mar 30 07:10:56 EDT 2017 | nickywan
I have a problem with some particle, dust and solder paste contaminate on PCB rack and need to clean up once a week by manual. Now looking for the equipment to do Inline cleaning with water jet & Hot air Dry concept. Not too big machine and concept l
Electronics Forum | Tue Oct 27 07:09:37 EDT 2015 | prameel_84
Hi Everyone, I got an approval to buy a Ionic Contamination Tester in my company, hence i require expert advise to proceed further for machine procurement At present I've fixed for Zero-Ion G3 Ionic Contamination of Aqueous Technologies and SMD V T
Electronics Forum | Tue Oct 07 14:23:37 EDT 2003 | Adam
The Omegameter (or Ionograph) detect contamination by measuring the conductivity of the solution used to extract the board. This conductivity number reflects the sum of all of the ionics in the extraction solution. Unfortunately, we can't sort out th
Electronics Forum | Mon Feb 27 13:02:13 EST 2006 | masrimhd
Hi, Thank you for your answers. But I want to explain some points on which I would appreciate any comment: * Having calibrated the process, we intend to carry out the ROSE test just on SAMPLES of the finished boards. Lets say one every hour. I exp
Electronics Forum | Fri May 18 13:08:19 EDT 2012 | blnorman
I'll chime in here as well. If you have adhesion problems, 90% of the time it's contamination on the substrate (soldermask, flux residues, cleaner residues, etc.). Like Dave said, omega meter is a test for gross cleanliness, and it's OK for process
winsouce.jpg)