Electronics Forum | Thu Sep 23 11:28:57 EDT 2004 | Frank
We have placed labels using the Hover-Davis label feeders on our Juki machines and we used standard nozzles. Are your labels an odd shape where a standard nozzle won't work?
Electronics Forum | Thu Sep 23 11:50:54 EDT 2004 | JB
We are using a standard nozzle Once placed, the label is not flat, the ends of the label are slightly lifted on both ends. The label is .650 x .200 Have you guys run into a similar problem?
Electronics Forum | Tue May 06 09:38:41 EDT 2003 | blnorman
We use both labels and lasers to mark our boards. Since implementing the lasers, the downtime attributed to bar code labels on those lines have dropped to virtually nothing. We still have problems with the labels wrinkling during reflow making read
Electronics Forum | Thu Sep 23 10:28:33 EDT 2004 | JB
We are placing labels using a Hoover-Davis feeder with a GSM. Anybody else out there doing this? My question is: Are you using a special nozzle for this operation?
Electronics Forum | Tue Sep 28 12:44:30 EDT 2004 | JB
You are right, basically our options are down to a custom nozzle. Pushing down the label is not the route that I would go with. Thanks for your input and good to hear that you guys found a way around it.
Electronics Forum | Fri Sep 24 12:02:57 EDT 2004 | Frank
Yes, I can see your problem, the nozzle makes only good contact in the center and so the ends don't make good contact. The ends tend to curl up during reflow. There were two suggestions to solve this. 1) Let the operator push down the labels befor
Electronics Forum | Fri May 31 16:26:22 EDT 2002 | Feederman
Steve, you might want to check out the pre-printed and print-on-demand label feeders that are available through Hover-Davis. These types of feeder remove the potential human placement errors which sometimes occur. The feeders are available for most p
Electronics Forum | Mon May 05 22:24:17 EDT 2003 | jlipton
We are investigating a system, using 2-D matrix code, that will identify and track every PCB throughout our factory, starting from bare board. As a low-medium volume manufacturer, would labels or laser marking be more cost-effective? How difficult is
Electronics Forum | Wed Sep 15 11:08:45 EDT 1999 | Dave F
| I am looking for help on doing smt equipment qualifications. I need to find some examples to follow. The equipment to be qualified is a Stencil Machine, Pick and place machine, and Reflow oven. We manufacture medical devices so it has to be somewha
Electronics Forum | Thu May 28 10:57:10 EDT 1998 | John
Our company is currently looking to implement a SMT production line. What I am looking for is feedback on people's experiences with various machines. Here's what we are in the market for: Low/Mid volume 3,000+cph machine that can handle high job fle
