Electronics Forum | Fri Mar 18 16:55:08 EDT 2011 | asksmt
Hi All, i am soldering battery to the back side of PCB and there are some TH Pins comes right BELOW the battery body. Can you please suggest any kind of insulating material / tape which i can use and the insulator between solder pins and battery bod
Electronics Forum | Thu Aug 25 09:56:39 EDT 2005 | cyber_wolf
Can anyone tell me what he overall height of a CP6 board support/backup pin is supposed to be? They don't sell the back up pins as an assembly. It looks like you have to buy them piece by piece and set the height yourself. Thanks
Electronics Forum | Mon Aug 23 20:56:29 EDT 1999 | Dave F
| I am looking for a source of tooling pins (various diameters) which can be easily attached (ie. taped) to pieces of FR-4 stock to allow for quick and cheap fixtures to run in my smt machines. I've seen these in the past where the pins are attached
Electronics Forum | Thu Aug 25 11:15:16 EDT 2005 | dougs
do you mean the board support pins? generally anytime i've set these up i've just set the height as i've went, i put the pin under the board, with the board clamped, and move it up until it touches the board and set it there. you just need to make
Electronics Forum | Thu Aug 25 14:41:06 EDT 2005 | jdengler
The height varies with board thickness. The top of the board is always held at the same height so as the board thickness increases the pin height decreases. Jerry
Electronics Forum | Tue Aug 24 15:06:06 EDT 1999 | John Thorup
| | I am looking for a source of tooling pins (various diameters) which can be easily attached (ie. taped) to pieces of FR-4 stock to allow for quick and cheap fixtures to run in my smt machines. I've seen these in the past where the pins are attach
Electronics Forum | Wed Jul 08 15:18:20 EDT 1998 | Upinder Singh
We are wave soldering a board having 24 similar thru hole connectors on it, using a wave soldering pallet. The problem is that one particular pin of connector in around 6-9 connectors get excess solder on the bottom side. I have tried all the parame
Electronics Forum | Sat Mar 19 09:46:55 EDT 2011 | davef
Try 'fish paper' it's a vulcanized fiber sheet
Electronics Forum | Fri Sep 13 18:01:18 EDT 2002 | dbonilla
Do you know what will be the best solder process for pins at the edge of the ceramic substrate? Thanks
Electronics Forum | Fri Sep 13 18:01:39 EDT 2002 | dbonilla
Do you know what will be the best solder process for pins at the edge of the ceramic substrate? Thanks
