Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
1809 MK5 - Heller Advanced In-Line Vacuum Reflow Oven Nitrogen System with Balanced Flow Technology 9 Top And Bottom Heated Zones - highest zone count per linear foot in the industry! 100" Heated Length - for super throughput! 2 Internal C
1809 MK5 - Heller Advanced In-Line Vacuum Reflow Oven Nitrogen System with Balanced Flow Technology 9 Top And Bottom Heated Zones - highest zone count per linear foot in the industry! 100" Heated Length - for super throughput! 2 Internal C
Industry News | 2017-04-24 19:04:48.0
This year, MIRTEC will launch several new inspection machines equipped new cutting-edge technologies. MIRTEC is proud to be promoting these new machines in booth #1J10 at NEPCON China 2017, one of the biggest technical exhibitions of SMT and EMA, from April 25-27 at the Shanghai World EXPO Exhibition & Convention Center. MIRTEC’s new machines have been developed under a concept, ‘Perfect Inspection Solution’. This is an inspection concept involving the combination of 3D, 2D, and side-camera inspection.
Product introduction: Streamline shape design make the oven looks great,PLC+PID closed loop control to achieve high prectise temperature control and repeatable profilies. It can save 50 groups temperature parameters and provide extra 2 ports for
Product introduction: Streamline shape design make the oven looks great,PLC+PID closed loop control to achieve high prectise temperature control and repeatable profilies. It can save 50 groups temperature parameters and provide extra 2 ports for
New Equipment | Test Equipment
slim kic 2000 Specifications: KIC 2000 Profiler * 9 Channels Slim Kit KIC 2000 Profiler * 9 Channels * Full Original Package, with original Thermal Couples, Protective Shield, Software, etc * Technical Support and Warranty from USA * Thermal Pr
slim kic 2000 Specifications: KIC 2000 Profiler * 9 Channels Slim Kit KIC 2000 Profiler * 9 Channels * Full Original Package, with original Thermal Couples, Protective Shield, Software, etc * Technical Support and Warranty from USA * Thermal Pr
New Equipment | Test Equipment
SLIM KIC 2000 SPECIFICATIONS: KIC 2000 Profiler * 9 Channels Slim Kit KIC 2000 Profiler * 9 Channels * Full Original Package, with original Thermal Couples, Protective Shield, Software, etc * Technical Support and Warranty from USA * Thermal Pr