Technical Library | 2019-06-21 10:39:15.0
Recently, an ACI Technologies (ACI) customer called to discuss failures that they had observed with some through-hole capacitor parts. The components were experiencing failures following vibration and accelerated stress testing. Upon receipt of the samples, ACI performed three levels of inspection and Energy Dispersive Spectroscopy (EDS) testing to investigate the root cause of the failures. These analyses enabled ACI to verify the elements comprising the solder joints and make the following recommendations in order to prevent future occurrences. The first inspection was to investigate the capacitor leads using optical microscopy, and no anomalies were found that could indicate bad parts from the vendor or improper handling prior to assembly. However, vertical fill in the barrel of the plated through-holes was too close to the IPC-A-610 minimum specification of 75% to determine a pass/fail condition, and therefore required further investigation.
New Equipment | Rework & Repair Equipment
BEST HeatShield Gel™ is a thermal shield water-based gel designed to be used in the PCB rework/repair or board assembly areas in order to provide thermal protection of electronic components. It is truly a revolutionary means to protect components. It
Industry News | 2016-01-05 16:10:10.0
Novel method for protecting electronic components from heat.
【Type】 DEC 【Power(W)】 60W-200W 【Maximum output voltage(kV)】 ,0.5,0.8,1,2,3,5,8,10,15,20,30,40,50,60,65,70,80,100, Wisman DEC series high voltage power supply is a portable high voltage power supply, computer digital control and analog control opt
Automated potting of electronic devices with polyurethane resin What is the difference between 2K AB adhesive materials manual potting machine and robot potting machine ? Automatic AB potting machine is composed of Five Systems: Vacuum mat
New Equipment | ESD Control Supplies
ABB FIS-3A ABB FIS-3A Contact 24/7 hours Manager: Jessica | Email: sales3@amikon.cn Skype: jessica01235483 | Phone: 86-18030235311 https://www.moore-plc-center.com/ http://www.mvme.cn/ Amikon is one of the largest
Two component (also called meter mix) dispensing systems are used for mixing and dispensing two part materials, typically adhesives. The two parts of the adhesive come together in the system, typically through a static mixer, and activate to start th
Industry News | 2018-09-06 15:18:14.0
Although many High Q capacitors are available on the market, performance can vary widely depending on design and quality of manufacturing
Industry News | 2018-10-18 10:28:01.0
The Future of Embedded Passive Components
Industry News | 2021-10-29 21:16:15.0
One of the most successful energy management tools ever used in HVAC (Heating, Ventilating and Air Conditioning) systems of buildings is the Variable Frequency Drive (VFD).Over the past 20 years, VFD has been successfully installed on fan and pump motors in a variety of variable load applications. The saved energy is up to 35% to 50% compared with using traditional constant-speed applications. And the investment return period is 6 months to 2 years.