Electronics Forum | Mon Mar 05 23:10:25 EST 2012 | vinitverma
The algorithm only checks if all the 8 parts can be picked up by 8 heads without any mechanical interference during pickup or during rotation. In case if foresees any interference it divides them into two different charges instead of one. You can try
Electronics Forum | Fri May 11 14:19:14 EDT 2012 | cyber_wolf
Regarding nano coatings : Nano coatings are susceptible to wear during the printing process and cleaning processes. As they wear they flake off and can potentially contaminate your solder. There is not a lot of independent data available on this so k
Electronics Forum | Thu May 10 22:16:51 EDT 2012 | davef
It's bad practice to remix used solder paste with new solder paste in the jar. Further, some would argue that it's bad practice to reuse solder paste period. If economics force you to reuse solder paste, store it for reuse in an empty jar. When rea
Electronics Forum | Wed May 23 18:53:20 EDT 2012 | stentech
Pick and place is not my area but I did have a customer a while ago with a similar problem. He did try different nozzles and air pressure. They use Nano protek on thier stencils. He wiped the nozzles with Nano Protek and the problem dissappeared. Onl
Electronics Forum | Mon May 21 16:19:40 EDT 2012 | tbouslog
We are using Ekra Stencil printers and they are great except for 1 problem... We run several different boards a day and we need a way for the operators to place the pin supports in the same postions on the second side of the board everytime a board i
Electronics Forum | Mon Jun 04 16:27:55 EDT 2012 | jorge_quijano
Hello there, I just want to ask you how often do you take your profiles on the Reflow Oven and Wave solder? I have a HMLV line running 5-6 products per shift (Reflow Oven & WS) my tech spend too much time checking the profile, but no major difference
Electronics Forum | Fri Jun 08 13:08:46 EDT 2012 | andydavis
We have a My500 at out plant. We are high volume and low to medium volume. It is a great machine and is a great solution to some problems that a conventional screen printer cant get around. For example, we have some producets that are not flat on
Electronics Forum | Thu Jun 14 21:48:41 EDT 2012 | kmots15
We work with a lot of larger boards over 24", haven't run into this issue yet. I agree with scott could be your board supplier if they are lower quality, from something as simple as unit conversions in CAD to dealing with different temperatures. A
Electronics Forum | Wed Jul 04 10:08:23 EDT 2012 | daxman
I would agree with innova's suggestion of Marantz. I've seen 3 different AOI machines implemented into our shop, and you really have to consider the ease of use, and possibility of defects that operators can introduce. AOI's, theoretically, look good
Electronics Forum | Mon Jul 16 16:28:18 EDT 2012 | mikesewell
I'm somewhat frazzled by this one, not being too familiar with the MYs. Head is clean, tried different tools, same tool# from another MY, and have run the Centering Base Level Calibration to no avail. The component heights are correct and the par
