Electronics Forum | Thu Nov 02 17:15:48 EST 2006 | Mike Konrad
Asoe, The systems you are describing are Resistivity of Solvent Extract (ROSE) Testers. These systems are available using one of two technologies, Static or Dynamic. Both systems use a calibrated test solution comprised of IPA and DI water. The t
Electronics Forum | Sat Dec 09 09:51:14 EST 2006 | pvasquez
Hello Lou, As a high-mix low-to-mid volume manufacturer, you will need to concentrate on equipment that may be progammed very easily, with very quick debug time from assembly to assembly. I have worked with Agilent in the past, and one of my collea
Electronics Forum | Thu Apr 19 08:50:38 EDT 2007 | rgduval
Welcome to RoHS. Or, at least, to the version of RoHS that I've had to deal with since I started with my current company. Blowholes and pinholes seem to be common in PB-free manufacturing. At least, they have for me here. I also note that IPC has
Electronics Forum | Sat Sep 22 01:30:31 EDT 2007 | mika
I am sorry my friend, but I can't recall that specific error number. But it would help if you explain a little bit more about your problem. Remember that an error code Do Not necessary points to a direct root-cause of a problem. First of all we nee
Electronics Forum | Fri Mar 21 15:51:23 EDT 2008 | g2garyg2
Thought I would reply and try to assist. PROMATION, my company, also manufactures Diode Laser soldering systems but with this stated we also manufacturer iron tip systems, soft beam systems and hot air solutions. The reasons are simple. Diode Laser
Electronics Forum | Mon Jun 30 12:41:03 EDT 2008 | realchunks
Hi Dave, I am not a sales person pushing my wares here, just my engineering experiences - so I hope I am not out of line here on this forum anymore. When it comes to selective or spot soldering - it all depends on your board design. Many people al
Electronics Forum | Tue Nov 11 17:35:08 EST 2008 | davef
SM-840, is a material qualification document only, with all the test requirements applicable only to a defined test coupon, not to production boards. So, it's useless for what you're trying to accomplish. As assemblers use A-610 - Acceptability Of E
Electronics Forum | Sun Feb 15 09:59:31 EST 2009 | pvasquez
Hello Muarty, This is the age old question on AOI. Fortunately, the answer hasn't changed much over the years. It really depends on your business...period. A high-mix low-to-mid volume manufacturer, will need to concentrate on equipment that may
Electronics Forum | Fri Sep 25 12:26:34 EDT 2009 | clampron
Some information on the web regarding RoHS and tip life... What problems are there for using Lead-free solder? ? Higher melting point of Lead-free solder may cause physical and thermal damage to components and PCB. ? Lead-free solder has poor
Electronics Forum | Tue Dec 01 17:50:43 EST 2009 | swag
This is cut and paste from a Conceptronics Document - hope it helps you: Following are the lubricants recommended for oven maintenance: 1. To lubricate the conveyor chain use: A. Biral BIO30 -synthetic high temperature oil (highly recommended)
