Electronics Forum | Tue Jul 16 07:33:32 EDT 2002 | pjc
Communication is the issue. What we have here is a failure to communicate....how does that song go? I implemented a system whereby incoming inspection would check component packaging to the spec. If it did not match they were to contact the process e
Electronics Forum | Thu Jul 18 11:31:03 EDT 2002 | Mark S.
>But since we are a low volume high mix operation I need to account for almost every part used. I'm in the same boat, and we do more changing of feeders than actual placements it seems. What I have done which has improved things a lot is in our MRP
Electronics Forum | Wed Aug 07 08:43:32 EDT 2002 | davef
Comments on copper plate temperature monitoring are: * Some people use this type of temperature monitoring to start the day as an element of an oven capability measurement and monitoring program. * Using a copper or other metal plate, like aluminum,
Electronics Forum | Tue Sep 17 12:38:17 EDT 2002 | stepheno
If you have a newer style MPA like the MPA-G3, check out http://www.hoverdavis.com/Products/mpp/mpp.htm I find them much better than the panasonic feeders. You may have to set pitch to 2 or 3 because of timeing issues, or you can change the NC progr
Electronics Forum | Mon Sep 23 13:08:47 EDT 2002 | dragonslayr
Daan has made a valid point with regards to expertise and use of a machine. Yet I recognize that with advanced technology, trades must occur. A hghly sophisticated AOI unit can and will help reduce overall cost of production. Therefore, a need to ha
Electronics Forum | Thu Sep 26 11:24:47 EDT 2002 | kenbliss
Hi DaveF and Brian Doyle Here is my two cents, and a change in my previosuly posted thoughts about control. Before we all go wild with alot of police work and programming, how about simply posting basic forum rules at the top of the main conference
Electronics Forum | Wed Oct 16 09:30:11 EDT 2002 | nwyatt
I've worked with Panasonic, Fuji, Siemens, and Universal. I cannot rate Mydata since I have no experience with them. Here are my ratings based on personal preference: 1=Siemens 2=Fuji 3=Universal 4=Panasonic My reasoning behind this is: 1) Siemens
Electronics Forum | Sat Nov 16 21:19:37 EST 2002 | MA/NY DDave
Hi, An interesting tread, Neat reading. Just pulled out a guide that was given at Nepcon West2000 entitled: Nepcon West 2000 Pick & Place Evaluation You might want to call them to get a copy of the report. As two or three others already pointed
Electronics Forum | Mon Nov 25 20:57:23 EST 2002 | Kermit
Thanks to everyone who has responded so far. We are going with dedicated tooling for our phone cards but not for our system cards so that takes that out of the equation for the former, will evaluate for the system bds.. Thanks for the info.. Regard
Electronics Forum | Mon Nov 11 17:16:11 EST 2002 | soupatech
Hi, I use the Fuji MCS-16F. The disks I have are labled.... MCS 2E System Disks #1 - #10 Version 3.38 MCS 2 Option Disks #1 - #2 V2.54 Automatic Programming 10 MCS 2 Option Disks #1 - #2 V2.49 HOST Communication 11 OS-9/6800 Level 1 System Di