Electronics Forum | Wed Sep 18 07:04:22 EDT 2013 | davef
That's great Paul. Would you share with us the methods and results of your study of the effectiveness of water versus vapor degreasing cleaning?
Electronics Forum | Fri Sep 20 11:57:47 EDT 2013 | emeto
It will be very hard to find anything on this prize. You also have to know that if the machine cost is 15k, the feeders cost might be about the same amount or even more. Even manual placers will probably cost you more. Just try to change the budget.
Electronics Forum | Wed Sep 18 22:54:08 EDT 2013 | hello123
Any one knows what that machine or tools call?
Electronics Forum | Sat Sep 21 20:27:48 EDT 2013 | hello123
Thanks for the help. I'll give it a shot.
Electronics Forum | Thu Sep 19 19:28:10 EDT 2013 | mdang
Does anyone out there have a method of cleaning CP6 shaft clutches? What tools do we need and what to look for before start? Thanks, -Michael
Electronics Forum | Fri Sep 20 13:26:00 EDT 2013 | mdang
Hi Sr.Tech, I already order the jig from used equipment dealer. I have a thin 8 mm wrench and 8 mm allen wrench. How do I remove the clutch from the ring gear? Thanks, -Michael
Electronics Forum | Mon Sep 23 02:54:40 EDT 2013 | pradeep_selec
We are using Dpak package & I would like to know which is the best Aperture shape for DPAK, whether is there any problem if the Aperture of Ground pad is made of the same shape & size as the pad & what are the possible issues faced with it. Can I hav
Electronics Forum | Mon Sep 23 09:55:12 EDT 2013 | emeto
Hi, just for the package you have you will see 20 different designs for the ground pad. Some will be 1:1 with the part some will be 3 times bigger than the part ground contact. I would always print according to the part and will always do a windowpa
Electronics Forum | Fri Oct 11 16:25:43 EDT 2013 | scdunlap
Also coplanarity can be poor on these parts so overprinting the paste (beyond the pad perimeter) can increase volume to insure robust solder joint.
Electronics Forum | Tue Sep 24 18:10:39 EDT 2013 | nophsem
Hi! During the operation there were random errors, mainly motor error #4, but I could continue with the production, and finally I restarted the machine and immediately appears: SRX AUTOBAUD Engine error # 5 I would appreciate your help. Thank you.
