Electronics Forum | Wed Nov 29 06:38:18 EST 2000 | Chris May
Dear People, Can anyone point me in the right direction. I am involved in manufacturing low volume (batches of 4-20) pcb's. I have been investigating Process Characterisation ref EIA/JEDEC PUBLICATION 132. For such a low volume scenario, has anyo
Electronics Forum | Tue Jan 30 02:29:16 EST 2001 | arul2000
Dave, To do further analysis we don't have the BGAs of the batch from which we had this issue. We don't face this issue now in the current production lots. The problem got solved while trying to find the root cause. Will keep updated if it occurs ag
Electronics Forum | Wed Oct 10 16:50:44 EDT 2001 | jeff
The "UP100 " is currently built by Speedline. However only the models UP100S (No Vision and manual adjust table ) and the UP 100MV (Vision and manual adjust table). These are batch printers not in-line. The IS model has been out of production for ab
Electronics Forum | Fri Jun 15 09:59:29 EDT 2001 | brownsj
We have recently had an incident where we feel that we have received a batch of cards from our assembly house which have by-passed their ICT operation. This has been determined by the lack of any indentations on the test pads from the sprung probes.
Electronics Forum | Mon Jul 23 10:21:50 EDT 2001 | caldon
Since we use tons of different fluxes and chemistries we clean often. A quick trip to our batch cleaner- run one cycle.....back to the bench. We have no control just a weekly thang. When the sponge starts to deteriorate then it is replaced. Caldon
Electronics Forum | Tue Jul 24 16:03:38 EDT 2001 | Steve
Interesting concept. Are the PCB's still coming off of the SM line one at a time, or are they being batched? It also seems as though you would need more duplicate tools since most stations are tool specific. It does make sense though because whether
Electronics Forum | Tue Jul 24 16:06:21 EDT 2001 | Steve
Interesting concept. Are the PCB's still coming off of the SM line one at a time, or are they being batched? It also seems as though you would need more duplicate tools since most stations are tool specific. It does make sense though because whether
Electronics Forum | Thu Jan 07 09:54:18 EST 1999 | Kirk Heyde
We are struggling with an effective way to control our SMT processes. I'm curious as to what parameters other companies monitor in their processes and how to control the quality coming off the end of the SMT line. We are currently restricted to a b
Electronics Forum | Tue Jan 12 08:24:00 EST 1999 | Dave F
| We are struggling with an effective way to control our SMT processes. I'm curious as to what parameters other companies monitor in their processes and how to control the quality coming off the end of the SMT line. We are currently restricted to a
Electronics Forum | Tue Sep 22 06:07:02 EDT 1998 | jacqueline coia
need advice to point me in the correct direction for solution to the problem of unsoldered joints which look soldered under normal visual inspection, but when pull strength test is performed the leads are coming away from pad, no strong intermetallic