Electronics Forum | Mon Apr 15 20:44:00 EDT 2013 | dman97
So I swapped the memory card out and it seems to be a bit better. It doesn't kill the 24v power quite as much anymore. Thanks for the tip. I will monitor this throughout the week.
Electronics Forum | Wed Dec 11 00:18:02 EST 2013 | mnorthey
Sounds like you solved your problem, If you are looking for more CP-3's I have 5 working machines that we are about to scrap. Email me if interested at mnorthey@logican.com
Electronics Forum | Thu Apr 18 14:04:11 EDT 2013 | dilogic
Are you trying to bring up to life an old machine or the problem just started to appear? There might be several causes for this problem. As a quick fix, you can change in th settings logic polarity of that signal, so it will be OK when actually not.
Electronics Forum | Fri Apr 19 01:46:20 EDT 2013 | dman97
This machine had been off for a few months. After we booted it a few days ago, this problem popped up. How exactly would I change the logic polarity?
Electronics Forum | Mon Apr 22 04:19:09 EDT 2013 | dilogic
Parameters->Miscellaneous I/O then select Inputs and scroll down to REAR_P2P_TOWER_DOWN, select appropriate input and change State field from 1 to 0, then press OK and save.
Electronics Forum | Wed Apr 24 12:47:25 EDT 2013 | smtventasmex
Hi i am not local i am at texas, but as soones what i can do for you is offer parts if you need vhmadero@smtvys.com
Electronics Forum | Wed Apr 24 15:38:02 EDT 2013 | dilogic
Check the fuses on the power distribution panel. All of them have indicating LED, so check is easy. Maybe 24V feeder supply is out...
Electronics Forum | Thu Apr 18 14:09:57 EDT 2013 | bobpan
Just because a feeder has 8 pins on the front does NOT mean it is IQ. The IQ feeders started at a certain level of feeder part number.....which i do not remember being that many people dont use the IQ system. Good Luck
Electronics Forum | Fri Apr 19 05:26:22 EDT 2013 | bobpan
There should be a sticker on the feeder that says 10-??????. This is the feeder part number. I think the IQ feeder manual tells you at what point the feeders will communicate with the IQ software.
Electronics Forum | Wed Apr 17 10:34:29 EDT 2013 | proteceng
We are looking for a company or individual that can offer operation, programming, and maintenance training on the Samsung CP45FVNEO machines? If this is something you can provide then we look forward to hearing from you ! Call Andrew Sankey on 0044
