Electronics Forum | Mon Jul 24 15:50:51 EDT 2023 | proceng1
I am going to be using a pressurized dispenser for Chemtronics CM1 peelable mask. I need to find a solvent that will work for flushing the system. I tried Xylene that we have here and it does ok, but not as good as I'd hoped. It works very well fo
Electronics Forum | Tue Oct 31 19:28:24 EDT 2023 | ttheis
We built our own coating system by mounting a Universal Robots UR5 to an edge conveyor between a magazine unloader and magazine loader. The robot has a needle dispenser on the head. We chose a needle dispense process to avoid aerosols and complex ven
Electronics Forum | Mon Dec 18 14:11:02 EST 2023 | erikfriesen
Has anyone ever replaced the venturi vaccum pump on the CP45 or other series machine? Or used a centralized vaccum system? It works fine, but air consumption seems excessive. This is what is in there, it probably uses 10cfm at least. https://www.p
Electronics Forum | Sun Mar 03 08:12:12 EST 2024 | dimamalin
Hello everyone, our choices are between: 1.Aqube MV3 One (Kolb Cleaning Technology) 2.X30 (Austin American Technology) 3.N29AUTO (MBtech) 4.Inget 388 CRD-2PR (DCT) 5.MiniSWASH (PBT) Any opinions, suggestions, and comments regarding this choice
Electronics Forum | Mon Mar 11 12:58:31 EDT 2024 | denism
Hi Dima, A past job used a PSE 300 from KOLB for 10 years. With proper maintenance, no problems were found. DST InJet was used in another production. As far as I know, there were no problems either. DST also has an interesting option, such as measuri
Electronics Forum | Tue Mar 12 11:00:34 EDT 2024 | dontfeedphils
Couldn't tell you for sure as it's been 4+ years since I used the PARMI and 7+ since I've used the Koh Young. I was unimpressed with the repeatability of the laser based PARMI system and I was always impressed with just about everything from Koh You
Electronics Forum | Wed Mar 20 15:15:36 EDT 2024 | daniel_stanphill
Dima, we just purchased an Aqueuous stencil washer. We already have a board washer from them and have been thoroughly impressed by their performance, also measures the resistance in the rinse water to confirm it meets the cleanliness standard you set
Electronics Forum | Wed Mar 20 23:30:43 EDT 2024 | daniel_stanphill
I have heard great things about Viscom. I have seen demos and been thoroughly impressed but do not have any personal experience operating one. I also heard great things about Omron, but they are super expensive I've gathered. A closed loop system by
Electronics Forum | Wed Apr 03 22:07:13 EDT 2024 | compit
Not every program can clone a CF card. I did it but I need to check with what kind. You can also simply insert a new CF card into the machine, INSTALL DOS from floppy disks (same version) and then COPY the entire disk EXCEPT the system files (msdos.s
Electronics Forum | Tue Aug 29 05:58:28 EDT 2000 | Chris May
Andy, I have been "evaluating" some AOI systems. However, some of these are actually SAOI (Semi Automatic Optical Inspection), which is not a problem if that is what fits your process and budget. You can buy a high end system complete with many cam
