Electronics Forum | Tue Mar 30 08:11:27 EST 1999 | George Steele
| | I require some feed back from any one who knows about using a voc free flux in a nitrogen wave solder machine soldering both through hle and smt componants. | | What disadvantages are there when using this flux? | | Do you have any contact detail
Electronics Forum | Mon Aug 09 20:47:21 EDT 2004 | KEN
I think OA flux left on the pot would quickly looses its activity and become part of the dross waste stream, and smoke stream for that matter. Also, if your wave is setup properly your selective pallets will scour (push) the top of the lambda wav
Electronics Forum | Fri Sep 17 06:01:12 EDT 1999 | Earl Moon
| | We have some SMT components with gold plated leads. They're actually LCC led packages. A good solder alloy to use would be Indium / Lead to reduce tin dissolution into the gold and avoid the resultant brittle intermetallic compound. However, a re
Electronics Forum | Fri Jan 26 08:28:59 EST 2001 | Sal
I am currently in the Process of setting up some SPC software on our Wavesoldering equipment. What I would like to know for each Parameter that is listed below what kind of variation from my average setpoint would cause defects.Example. If the averag
Electronics Forum | Wed Feb 09 22:08:45 EST 2000 | Dave F
Russ: You've got stop soft-peddling this stuff. This doesn't sound like "poor solderability." It sounds like "no solderability." It also sounds like you�re dead meat. Three places to call: 1 Board supplier to get their suggestions on unsolderab
Electronics Forum | Thu Sep 17 01:44:42 EDT 1998 | Robert Murphy
| Gentlemen, | Can anyone provide information on selective soldering systems that compete with Ersa's VersaFlow? Does anyone have experience with this machine or other machines of this nature? | My company is considering acquiring to increase techn
Electronics Forum | Wed Aug 23 14:59:32 EDT 2006 | bill
I�ve been lurking on the forum for a while so I will take a stab at this, mainly because there is no answer I take it that you have a variety of boards being produced at the same time and are in fixtures so the conveyors don�t need to be adjusted, a
Electronics Forum | Fri Feb 25 11:37:17 EST 2005 | OverTheHill
I believe I read somewhere, that using leadfree solder in the wave, the dross will actually collect in the bottom of the solderpot. I can't remember where I read this (maybe a nightmarrish dream I had one night). If so, how do you remove it from the
Electronics Forum | Thu Jan 04 17:26:17 EST 2001 | Cory
We're going to begin conformal coating a few of our assemblies as required by our customer. We're using Kester No clean paste and will use cotton gloves to keep the boards clean while handling. My question is: Do we need to clean the boards prior to
Electronics Forum | Thu Nov 30 14:32:07 EST 2000 | Claude_Couture
Production of 50000, is this per year, per month, per week, what? As for your budget of 80000 Euro, that is no much to go on. For a basic SMT line, you need at least 1 paste printer, 1 placement machine and 1 reflow oven. If you have any through-hole
