Electronics Forum | Fri May 06 07:29:55 EDT 2011 | leemeyer
You got it. You are aware that Quad defines the theta by steps. 0 = 0, 90 = 6000, 180 = 12000 and 270 = 18000.
Electronics Forum | Fri May 06 09:39:26 EDT 2011 | leemeyer
Sorry but I have never worked with a machine that has the Cyberoptics system. Have you tried talking to PPM (www.goppm.com), They have been very helpful to me.
Electronics Forum | Sat May 07 07:03:16 EDT 2011 | jimlas53
Thanks for the suggestion, Bobpan. I'll start looking for a replacement coax cable. Would we be better off to look for a Quadalign system and replace the Cyberoptic unit? Doug
Electronics Forum | Tue May 31 15:00:03 EDT 2011 | leemeyer
I have never heard of a Quad "S" series machine. Can you post the entire model #.
Electronics Forum | Fri Jul 15 18:14:59 EDT 2011 | hegemon
Finetech wopuld be a great machine for this application due to the small component size. Great optics for the alignment. I have no affiliation with Finetech. 'Hege
Electronics Forum | Thu Nov 17 15:57:41 EST 2011 | olddog
Hi Bobpan, Regarding "second", the results of the test are no difference - still rejects the part. I tried 2 mils, 3 mils, 5 mils, 7 & 9. I changed the tolerances fron about 15% to 20%+. By the way, I did put on the new nozzle and it is still the sa
Electronics Forum | Sun Dec 11 22:49:23 EST 2011 | darby
7mm FOV with graduations of 0.05mm. They'll cost around $100 - $150. Fun for measuring other "stuff" as well. Enjoy yourself amigo and you're right, printin' is REAL important.
Electronics Forum | Fri Feb 24 13:21:42 EST 2012 | bobpan
The correct sequence steps should be: 1. tep hold 2-? pick/place/nozzles tep vpass goto 1 This is out of the programming manual.
Electronics Forum | Tue Feb 28 12:23:36 EST 2012 | veeckm
It sounds to me like your using only the Global fiducial mode. If your running multiple images on one panel use image fiducials instead
Electronics Forum | Mon Jan 21 10:21:12 EST 2013 | bobpan
Glad you got it working...if I had worked on them in the last 15 years i might of remembered some of the questions you were asking me a little better. But...hey....its working....thats all that counts.
