Electronics Forum | Thu Mar 13 10:41:13 EDT 2008 | slthomas
I don't know who's driving the bus there, but I personally would just tell my boss that it couldn't be done without: (1) compromising the quality and reliability of the product (2) increasing the cost to manufacture the product (3) increasing the scr
Electronics Forum | Fri Apr 18 09:16:59 EDT 2008 | samir
Yes, BLAME. It's a common theme in manufacturing unfortunately. Also, unfortunate, is that the PROCESS is the easiest thing to blame and often the path of least resistance to the non-technical manufacturing personnel (operations managers and line s
Electronics Forum | Fri Oct 31 18:08:34 EDT 2008 | m79d
thank you both for the input ok so i understand the hole is on a 5mmx5mm center the pin seems to be 3mm. About 3mm of the board goes under the clamp rail so the tooling strip must be wider than 5mm as the fiducial also needs to be on it. Mark_m yo
Electronics Forum | Sun Nov 09 21:52:26 EST 2008 | phomann
Hi, I have acquired a Fisnar I&500 Solder Robot that has not come with the expected manuals and software. The machine is a 2001 vintage. CAn anyone help me with obtaining the operating/service manuals for the base unit. I have managed to get the m
Electronics Forum | Mon Apr 06 11:58:42 EDT 2009 | c111
Jeong Ju-young You touched them all up with an iron? Wow! We have also had similar issues. What I did to prove there was a board problem was paste one & reflow one bare board with the same chem (noclean) we saw the non-wetting condition. Then applied
Electronics Forum | Tue May 12 10:03:12 EDT 2009 | daan_terstegge
Hi All, I see more and more components like QFN or LGA with bottom-only terminations,with landpatterns getting finer all the time. I have no ppm-figures of our process, but based on a benchmark study by Agilent I'd say that 500 ppm is a decent value
Electronics Forum | Fri May 21 09:08:58 EDT 2010 | rway
We recently received in a reel of a QFP-64 TI processors. TI has such a great lead time right now, we were forced to find these parts where we could. Unfortunately you are forced to deal with less than reputable people. So these parts did not come
Electronics Forum | Thu Jul 08 04:26:27 EDT 2010 | bks
Hello, this is my first post in this forum, but sometimes I visit it to get some news. Now we have an issue and I need your advice. Few months ago we were awarded with a project that use PTH components. We solder these components on Wave soldering
Electronics Forum | Thu Oct 21 12:44:07 EDT 2010 | swag
We issue extra parts like this: 8/2 caps and resis. - 40 over 8/4 caps and resis. - 20 over 8/4 IC's - 7 over 12mm - 7 over larger feeders + stick + matrix = the correct # req'd. These #'s were based on our first SMT lines (used equip.) and we made
Electronics Forum | Wed Oct 26 20:20:28 EDT 2011 | machinehead
Our Company is suffering a Huge lose in scrap parts. I recently took over the My12 MyData SMT Machine. And I'm trying to find a remedy to the lose of exposed parts when pulling tape out of feeders. I've tryed alot of things? But still no Luck. I'm lo
.gif)
