Electronics Forum | Wed Sep 11 20:47:50 EDT 2013 | action_101
I forgot to mention the new vcd and radials go for around $230,000 each with only 20 stations. You can buy nice used vcd8 and rad8's between $60,000-$75,000.
Electronics Forum | Thu Jun 05 13:52:33 EDT 2014 | swag
230 C for 30 sec. max. We are not infringing on either limit. What can we do? Is this common? Is there accept/reject standards that I don't know about for something like this? Our customer HATES F.O.D. so that is likely why they are having issue
Electronics Forum | Thu May 14 08:22:27 EDT 2015 | m_imtiaz
in enclosed data sheet mentioned 230Pa.s with malcom viscosity meter i have brookfield viscocity meter kindly suggest
Electronics Forum | Fri Jun 03 09:34:42 EDT 2016 | proceng1
https://youtu.be/9wDZbI-H9RM Same machine. Board shift is at about 2:30.
Electronics Forum | Fri Aug 16 12:39:51 EDT 2019 | spitkis2
Liquid nitrogen that we get in 230 liter tanks is 99.9995% pure N2.
Electronics Forum | Sat May 09 00:03:52 EDT 2020 | compit
I don't know how in Germany, but in Poland it used to be 220V (380 for 3 phases), now it is 230V (400). Probably, after the change, no one switched the voltage to the trafo in the machine - these are old machines.
Electronics Forum | Wed Feb 23 12:12:45 EST 2022 | compit
I bought a Philips Emerald-X from the US and switched to 230VAC - you just need to switch jumpers on trafo in the machine.
Electronics Forum | Thu Feb 10 16:45:36 EST 2005 | pjc
It all depends on what type of board you need to solder. If your boards are small in size and low thermal mass and your conveyor speed requirments are normal, then I'd say the OmniFlo 7 will do the job. It has a max zone temp setting of 280C. The cur
Electronics Forum | Fri Oct 06 09:38:11 EDT 2006 | C.K. the Flip
Here's the BGA voids-reduction profile that I used: http://img323.imageshack.us/my.php?image=profileka0.jpg Keep in mind, this was for Sn/Pb BGA with Sn/Pb solder paste. For your situation, you might want to raise the peak temperatures to at least
Electronics Forum | Tue Nov 21 12:35:59 EST 2006 | CK the Flip
It probably depends on the Silver content. We are also using Sn62Pb36Ag2. The paste manufacturer told us that the reason for the small silver content was so that it could wet better to the lead-free component and board finishes bearing silver.
.gif)
