Electronics Forum | Fri Jun 09 17:09:23 EDT 2000 | JAX
Khalid, Just from experiance the actual would be 0.4mm but the inspection size would be 0.3mm. This should not matter since you should be able to pull up the spec sheets on any part you place.( All you need is the Vendor and the manufacting part numb
Electronics Forum | Sat Feb 10 18:33:52 EST 2001 | arturoflores
check the archives (keyword="16 mil pitch") and also consider 45 degree pattern printing. Regards.
Electronics Forum | Mon Sep 20 20:51:36 EDT 1999 | Greg H.
My stencil thickness is 6 mil and we got qfp's with fine pitch. how many percent should i reduce my stencil aperture using a 6 mil stencil for 0.5 mm pitch and 0.4 mm pitch ? thanks
Electronics Forum | Fri Apr 17 07:45:43 EDT 1998 | Robert Meston
We have to mount our SMD devices 0.1 to 0.4 mm off the pcb PCb substrate to compensate for thermal stressing in a Space enviroment. Has any one any ideas or contacts for dissolvable pads. this only applies to leadless components
Electronics Forum | Fri Apr 10 04:09:24 EDT 1998 | Ben Salisbury
Has anyone Ran parts on the CPII taller than 4mm? If so, what adjustments were made to the machines to accomodate such a part?
Electronics Forum | Thu Apr 16 14:44:31 EDT 1998 | Doug Carter
| Has anyone Ran parts on the CPII taller than 4mm? | If so, what adjustments were made to the machines to accomodate such a part?
Electronics Forum | Tue Mar 05 08:24:21 EST 2002 | davef
Try: http://www.practicalcomponents.com/ Oh, please thank them for supporting SMTnet when you talk to them.
Electronics Forum | Mon Jun 02 09:38:12 EDT 2003 | pjc
yo Evt, ".., what's the difference?". Answer: Huuuge!! between running 0.4mm pitch QFP and a BGA of same I/O, in terms of handling, storage, feeding (trays), p&p, inspection, test, rework, etc.......
Electronics Forum | Wed May 12 19:14:53 EDT 2004 | russ
We use Samsungs and have never encountered a 24mm with 4mm pitch. I actually have Samsung coming in tomorrow and we will reply. Russ
Electronics Forum | Fri May 14 08:31:07 EDT 2004 | todd_ferrell
We're looking for a contractor who can support high volume production of 0201 passives and 1-2mm csp's to create 4mm sq. RF modules as well as mold cap capabilities. Any leads would appreciated.