Electronics Forum | Mon Mar 26 16:58:53 EDT 2018 | solderingpro
Is there anything stopping you from replacing the flat belt solution to a continuous running steel roller chain conveyor? - From there (depending upon board temperature) you should be able to buffer your boards in a vertical buffer station if neede
Electronics Forum | Fri May 31 16:26:22 EDT 2002 | Feederman
Steve, you might want to check out the pre-printed and print-on-demand label feeders that are available through Hover-Davis. These types of feeder remove the potential human placement errors which sometimes occur. The feeders are available for most p
Electronics Forum | Fri Nov 03 07:28:27 EST 2006 | davef
Via filling methods are: * Tenting * Plugging * Capping * Flooding Tented Via. A via covered with dry film soldermask; the via is not filled. When tenting from both sides there may be issues with trapped air that expands during mass soldering. Plug
Electronics Forum | Tue Jul 09 10:15:17 EDT 2002 | msjohnston
Cal, Our parent company is a FAB and they are about to release a new generation of parts. Usually the die is qualified in a simple TSOP form factor. This time the first product quals will take place in the BGA and CSP from factors rather than the t
Electronics Forum | Mon Mar 03 12:14:33 EST 2003 | testing
I am trying to optimise the use of our Automatic Optical Inspection Machines. As the data we collect from the machine is mainly of the attribute type (Pass/fail, Defect1, Defect2, etc), what advice can you provide to improve its use as well as using
Electronics Forum | Tue Mar 04 16:02:53 EST 2003 | Dave C.
We have auto-correct funtion on our Panasonic Create CM-301 placement machines but have never turned it on because of a perceived loss of placement time when the camera verifies placement. We look at the first article and correct placemnt if needed.
Electronics Forum | Sat Feb 05 14:51:49 EST 2005 | etienne
One important thing to look at, when buying an AOI is the False Calls Rate, along with tact time of machine to inspect the PCB. Obviously, many machines can do the the work....but it's also true that each machine differ from the way it do the work. S
Electronics Forum | Tue Jan 12 21:24:13 EST 2010 | graceytiu07
We have a Viscom SPI S3054QS. Yup, the machine offers a quite good speed. My board dimension is 150 by 250mm. The cycle time is only about 24 sec. The analyze time is only about 10sec. You can make your loading faster, if that's what you needed. I ha
Electronics Forum | Mon Jan 25 01:35:56 EST 2010 | orproadamshaw
Hi, As stated above development of the systems we took over from Orbotech has not ceased. I don't know which geographic region you are in, but your first contact should be either a Business Partner, or ORPRO Vision support direct in the region. On
Electronics Forum | Thu Jun 15 14:42:35 EDT 2006 | Tim Austin
You wrote "The directive does not state anything about generating electricity"; actually it does do exactly that: Equipment, "which is dependent on electric current or electromagnetic fields in order to work properly, and equipment for the GENERATIO