Electronics Forum | Wed Sep 08 14:31:48 EDT 1999 | John Thorup
| | Hello: | | We are using a Heller 1500S reflow oven to solder surface mount parts. Just within the last two weeks, the larger I.C.'s are moving while going through the oven. The parts are checked for placement before putting into the oven.
Electronics Forum | Sun May 27 19:51:00 EDT 2012 | darby
Seeing as you say you only have a small amount of cash ... I'd also consider a semi-auto printer where you align a golden board, set up the two cameras by boxing or overlaying a pad etc, and then use the vernier adjustment to get each pcb to align wi
Electronics Forum | Thu May 05 18:14:11 EDT 2005 | rtorres
Hello we are having a problem with an Unitherm 500 reflow oven from Vitronics. the conveyor is not responding to the system, the speed is out of control, it seems to be alerted. Does any one know what is going on. your help is greatly appreciated. Re
Electronics Forum | Wed Jun 24 16:44:27 EDT 1998 | Gerryr
| We have a need to manually insert, cut and clinch a radial part that is prep close to spec on a board traveling down a standard conveyor. Is anyone aware of such a system? I only know of regan off line. There is a system called a clinch master by
Electronics Forum | Tue Jun 23 12:21:51 EDT 1998 | Robert Cass
We have a need to manually insert, cut and clinch a radial part that is prep close to spec on a board traveling down a standard conveyor. Is anyone aware of such a system? I only know of regan off line.
Electronics Forum | Wed Jun 24 16:40:32 EDT 1998 | GERRYR
| We have a need to manually insert, cut and clinch a radial part that is prep close to spec on a board traveling down a standard conveyor. Is anyone aware of such a system? I only know of regan off line.
Electronics Forum | Sat May 07 04:28:51 EDT 2005 | grayman
try checking the speed/conveyor driver,encoder,comunication I/O Board system and lastly the program. If the driver is at fault replaced it do not repair it. If software try to load it again but make back up.
Electronics Forum | Thu Mar 05 16:54:53 EST 1998 | Brian Stumm @ ETS, LLC
Not sure if you are open to looking at additional vendors but if you are we would love to compete for your business. Go to our web site then call or e-mail me for additional information. Sincerely, Brian Stumm Thermal processing consultant Reflow an
Electronics Forum | Tue Jul 17 19:52:02 EDT 2001 | dougs
Does anyone remember the name of the company that had a small inspection system located on the tact line behind the CP732E from Fuji and the reflow oven? It was a real simple system located on top of a standard conveyor. Pick your brains and let me k
Electronics Forum | Fri Nov 02 11:23:52 EST 2001 | dougt
Here's my 2 cents....... I worked for a small company that manufactures pick and place machines and had the task of testing/troubleshooting and the dreaded calibration. These machines used vision for part orentation and have what I considered aweso
