Electronics Forum | Mon Aug 18 10:42:04 EDT 2008 | floydf
We are in the process of preparing for a new board that requires paste in hole processing. The hole is a .020" via, and our customer wants it filled with solder, but not bulging past flush. For printers,we use a DEK 249 with a squeegee, and a DEK 260
Electronics Forum | Fri Jun 10 12:51:54 EDT 2016 | ttheis
Our company is looking to upgrade from a dek249 semi-auto printer to an automatic inline printer since we're doing some fine pitch packages which are tricky to line up, and we'll soon be tackling bga's for our products. We're looking on the used mark
Electronics Forum | Mon Jul 05 12:27:15 EDT 2004 | vinod
c.vinod mobile:+91 9886241251 Email:cvinod5@rediffmail.com sub :placement of job Respected sir, with due respect and humble submission,iapproach for suitable post. working for peninsula electronics in india(bangalore) for a period of 6yrs as
Electronics Forum | Mon Feb 21 18:13:23 EST 2005 | gpaelmo
As davef states above, you would like to have flat surfaces below 25 mil. We are a contract manufacturer also and we've done thousands of 15 mil QFP's with HASL finish with no problems. Your success will depend on quality of PCB supplier providing th
Electronics Forum | Thu Feb 15 16:58:11 EST 2007 | flipit
Phil, I used to print solder paste on 2" X 2" and 3" X 3" 96% Alumina substrates all the time. I used standard solder printers and stencils. Screens are difficult to use and don't print well. You can use a stencil on a DeHart, CW Price, or AMI Pr
Electronics Forum | Mon Feb 14 15:14:54 EST 2000 | dean
Dek 248 / 249 (mfg'95) MPM 2000 Realignment? Are you having to insert print offsets (X.Y, theta)? If yes, your vision cubes are out of alignment. This typically happens if a "crash" occures. A "C" tool can correct this. Or are we talking abou
Electronics Forum | Tue Mar 16 20:17:13 EST 1999 | Chris G.
| Are stencils universal from one printer to another? We are looking into the possibility of going from Solderprint 1414 manual printer to a more automated printer. We are also considering bringing some boards we currently outsource in house. I w
Electronics Forum | Mon Sep 23 07:40:17 EDT 2019 | spoiltforchoice
A fair price.... well its the feeders that retain value. I know if you were to sell an Essemtec distributor a machine with say 10 banks of CLM feeders that old, they would give you perhaps only £10k. Refurb CLM feeders are ~£3k gbp (or about 1/2 of n
Electronics Forum | Fri Dec 19 10:30:08 EST 2003 | haviland
Tony--Good morning. We deal in used and refurbed equipment and have a nice Panasonic line available now w/ DEK 265 printer, Pana PFA MV2CXL chip shooter w/ +(130) feeders, Pana MPA3F w/ +(60) feeders, BTU VIP 70 Reflow, several pieces of input and bu
Electronics Forum | Mon Feb 20 17:56:46 EST 2006 | Chris
If you are running FR4 PCBs and not something exotic like Kapton flex circuits, I would go with the Dek 265 any day of the week. You will find that Dek supports the fully automatic printer much better than the semiautomatic printers like the 260, 24
