Electronics Forum | Wed Dec 22 21:14:53 EST 2004 | davef
IPC-FA-251 recommends 121*C for 30-60 minutes for 1 and 2 flex layer circuits. A rigid flex can take easily an hour per layer depending on the construction.
Electronics Forum | Tue Mar 21 19:34:32 EST 2006 | Tom Smykowski
Omar: I dealt with this so called "hot bar" process also, and you're right; it's neither reliable nor repeatable. The goal was to attach a flex LCD display to another flex circuit. The flex LCD was constructed of resin and conductive silver particl
Electronics Forum | Mon Jan 11 20:26:54 EST 1999 | Chris G.
I have used conductive adhesives for some time now on thickfilm. Does anyone know of a really good conductive adhesive to attach flip chips to flex circuits? I would like to stencil print the adhesive to the substrate and then place the flips chips
Electronics Forum | Tue Jan 12 15:02:12 EST 1999 | Earl Moon
| I have used conductive adhesives for some time now on thickfilm. Does anyone know of a really good conductive adhesive to attach flip chips to flex circuits? I would like to stencil print the adhesive to the substrate and then place the flips chi
Electronics Forum | Tue Jan 12 15:04:40 EST 1999 | Earl Moon
| I have used conductive adhesives for some time now on thickfilm. Does anyone know of a really good conductive adhesive to attach flip chips to flex circuits? I would like to stencil print the adhesive to the substrate and then place the flips chi
Electronics Forum | Sat Mar 06 06:16:30 EST 1999 | VJ Pathak
I need to attach / assemble Flexible circuit onto Rigid PCB without use of any connectors i.e. fingers / tracks of Flexible circuit are to be attached / directly to the fingers of the Rigid Glass Epoxy PCB. I need info on the alternate processes, e
Electronics Forum | Fri Jul 02 09:27:36 EDT 2010 | remullis
I am new to flex circuit manufacturing, placing SMT. We have a need to use this technology, but I have no experience in the process. The sample our design engineers have obtained are from a company called Allflex. How does this process work? printi
Electronics Forum | Thu Jun 26 09:04:43 EDT 2003 | caldon
We had a "Spring loaded" fixture that pulled the Flex tight and used loads of Board supports. There were pins that went through the Connectors holes and held the flex firm. We only had a few components so it was no problem. Lucky for us because the f
Electronics Forum | Thu Jun 26 10:03:36 EDT 2003 | swagner
We have been processing a 3 and 5 up flex array for nearly four years on pallets and have had a pretty steep learning curve. Make sure you have vacuum holes in your pallet for the screen printing process, also work with your support block vendor to
Electronics Forum | Wed Nov 10 09:42:05 EST 1999 | Boca
Generic fabs should not require baking. Some special cases like teflon and flex circuits take moisture very well, they often continue to require a trip to the oven. Best wishes, Boca
Midwest Circuit Technology provides Carbide Router Bits and End Milling Cuters for use in PCB Depaneling equipment. We have over 35 years of supplying tools and machining experience in drilling, Routing, Test Fixture manufacture.
114 Barrington Town Square
Aurora, OH USA
Phone: 13309956900