Electronics Forum | Thu Jan 27 06:12:14 EST 2000 | Dean
Opeator point of view: 1. eassy to read menues. Organized structure. Large text and use of color to indicate important info status...green=good, yellow= warning, red=fatal etc. Simplicity rules in this realm. GUI are great for operations screens
Electronics Forum | Wed Sep 09 12:39:22 EDT 1998 | Chrys
| I am attempting to locate a kit to be used on surface mount equipment to determine the placement capability (CPk). Does anyone have information on where to purchase such a kit? Ideally this kit should be usable on placement equipment from various
Electronics Forum | Tue Aug 25 12:50:24 EDT 1998 | Lance Smalley
To see if the MV will recognize the marks, in the binary mode, when setting threshold (binary level), raise up the level until the edge of the mark starts to degrade. Write down the number. Lower the level until the fiducial starts to "bloom". Wri
Electronics Forum | Thu Jul 23 15:19:52 EDT 1998 | Timm
| | I am considering of Philips FCM for the next production. | | But I have heard a rumour saying this machine is not capable for checking the lead polarity due to the laser scan system. | | i.e. SOT might be populated in wrong direction. | | Can som
Electronics Forum | Thu Apr 30 17:03:45 EDT 1998 | Ray N. Lopez Mata
| | | | | | | Hello - | | | | I am interested in obtaining information on the possibility of integrating a Vision Inspection System with an SMT line. I am aware of systems which may be used to gather placement data and such, but are there any system
Electronics Forum | Fri Jul 24 12:53:30 EDT 1998 | Brad Kendall
| | | I am considering of Philips FCM for the next production. | | | But I have heard a rumour saying this machine is not capable for checking the lead polarity due to the laser scan system. | | | i.e. SOT might be populated in wrong direction. | | |
Electronics Forum | Mon Jul 27 12:43:19 EDT 1998 | Adrian
| | | | I am considering of Philips FCM for the next production. | | | | But I have heard a rumour saying this machine is not capable for checking the lead polarity due to the laser scan system. | | | | i.e. SOT might be populated in wrong direction.
Electronics Forum | Thu Dec 16 15:00:20 EST 2004 | glaucon
Simple differences. Both processes require a very similar machine platform, controlled motion, vision fiducial recognition and alignment of a substrate (PCB or hybrid ceramic) to the "image", the image being either a stencil (hence stencil printing)
Electronics Forum | Thu Jul 18 17:29:18 EDT 2002 | pjc
Forget what the machine's max. placement cycle rate is spec'd for. For each board you assemble time the actual placement rate. To do this start the stop watch the instant the camera is positioned over the first fiducial on the first board, then stop
Electronics Forum | Sun May 30 15:11:10 EDT 1999 | M Cox
| | | | | Is it possible to place parts that do not have leadframes exposed when looking from the top side of the part such as BGA's using a Fuji IP1 with a SMD1 vision (Binary) system. I realize that the IP1 does not have front lighting but accordin
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
.gif)
