Electronics Forum | Wed Aug 15 13:46:04 EDT 2007 | hussman
But in the REAL world where the part hits the board, all the software in the world can't predict part size descrepancy, polarity descrepancy, thickness error, or board tollerance errors.
Electronics Forum | Thu Aug 16 14:18:14 EDT 2007 | hussman
But are they virtual jobs?
Electronics Forum | Thu Aug 16 14:20:20 EDT 2007 | hussman
You may call a few used machine people. They may have them or know of a company that is going under and looking to get rid of them. Also try E-Bay.
Electronics Forum | Thu Aug 16 14:15:11 EDT 2007 | hussman
I agree with Doug. Stop the bleeding first, then find and stitch the wound up.
Electronics Forum | Thu Aug 23 11:24:16 EDT 2007 | hussman
Welcome to Chine. Your best bet is to specify the type of mask you want and the type of finish you need. If not, they run what ever they have available. You may want to contact you board vendor and find out what they can offer. That's what we had
Electronics Forum | Fri Aug 24 11:03:15 EDT 2007 | hussman
I agree with Joris. But to add to his comment, the type of finish also has a direct affect to your wave solder process. Going from a gloss finish to a matte finish may help a lot. As for humidity affecting your wave - I doubt it. I use a water
Electronics Forum | Fri Aug 24 12:39:59 EDT 2007 | hussman
I would say no, unless your machine is in extremeconditions. You may want to check your flux / preheat out as well. If you are leaving a lot of flux on the board at wave, it may be boiling - which can cause solder balls.
Electronics Forum | Tue Sep 11 07:58:02 EDT 2007 | hussman
Does he look at the board under a Mantus and mistake vias for solder balls, get mad and walk away? Mine does.
Electronics Forum | Tue Sep 11 08:00:46 EDT 2007 | hussman
HOW did you change the temp? Stay that course till you achieve the temp you need. Try slowing the conveyor as well.
Electronics Forum | Tue Sep 11 08:03:42 EDT 2007 | hussman
Are you using fiducials or pads?