Electronics Forum | Thu Aug 25 10:17:48 EDT 2005 | davef
Send the pic to dave5252 at hotmail.com [you can't send pic through the SMTnet email thing] For more on via plugging, tenting, capping ... look here: http://www.merix.com/technology.php?section=processes&page=pdf/Via_Fill_Plug.pdf Something, a voi
Electronics Forum | Mon Mar 07 08:22:09 EST 2005 | davef
Via in pad can have any size hole, but you're correct. The larger the hole, the more solder that is scavenged from the solder connection. We believe that a proper via in pad design will either: * Move the via to the edge of the pad and cover the vi
Electronics Forum | Thu Feb 15 12:32:14 EST 2007 | Eric D
one of my customer areworried about the flux risidue in the blind vias, or if the plug the vias and there is air trapped the plug will blow during our process. Appreciate for your response
Electronics Forum | Mon Feb 25 12:21:16 EST 2008 | stevek
Rather than having the artwork cover the via as with tenting dry film, and letting the mask do what it will, the preferred way is to do a second op silk screen with something like SR1000 just in the vias themselves to plug them. This doesn't always
Electronics Forum | Wed Aug 24 21:57:45 EDT 2005 | adeline_ko
The blistering is around the plugging via. I can forward you the pic. For the plugging process, I'm not too sure how they plug. What is the correct practise for the plugging via. Now, what they did is. They will do a tenting process for both side.
Electronics Forum | Sat Jul 11 03:01:29 EDT 2020 | researchmfg
The bubble inside BGA ball locate at via in pad and apply the resin plug hole.You shall check the cooper plating quality on PCB pad. If there is thin plating or broken on the pad then air will come from the resin plugged via and be trapped inside the
Electronics Forum | Mon Jul 26 12:55:34 EDT 1999 | M.L
Presently protos of micro-bgas (80i/o) pitch .030/.031 12BGA per assembly The board is a (.062, 4 layers) FR-4 using Dry film Pads .014inch Vias within footprint .020inch Vias to be filled by bottom side(solder side) only .030in dia. Force via plugg
Electronics Forum | Mon Mar 07 10:14:31 EST 2005 | jmedernach
Cellular and PDA architectures employ this technology all the time. You have to be careful with your board supplier as well as with your plugging approach. Leave the via unplugged, I guarantee voids in the solder joint. That leaves us with, "how d
Electronics Forum | Tue Jun 15 22:31:06 EDT 2010 | Mag10
Depending on the how you plug the via, the void level can significantly affected. If you have via plugged from the bottom side; i.e. opposite side of the component, you will see alot of void due to entrapped air in the via hole. I found work best wh
Electronics Forum | Tue Aug 23 22:50:09 EDT 2005 | adeline_ko
My process guy told me that. Due to black spot issue, brd with BGA must use electrolytic finishing. And when we had this finishing with plug via, the blister issue pop out. My supplier claim that this is due to the plug via. Which I don't know how
winsouce.jpg)
