Electronics Forum | Mon Sep 10 11:00:11 EDT 2007 | mgrimes
Chris, Appreciate the response - we set FP to "1" last week but no help. The drift is only in the X as well - the Y is never off. We have tried switching the cards to see if if the problem goes to the Y but it doesn't - stays in the X. As for the b
Electronics Forum | Thu Nov 11 17:49:11 EST 2004 | pdeuel
We are having a problem with our AP-24x printer. When the vacuum motor spins up we get a 60 hz buzz into the DC drivers for the forcers and the stencle wiper. We also indicate a main power drop from 115 vac to 80 vac. The vacuum motor checks out good
Electronics Forum | Wed Jul 28 12:43:52 EDT 2004 | adlsmt
Has anyone had any success in upgrading the PC in an AP machine?
Electronics Forum | Mon Apr 13 16:06:36 EDT 2009 | soudomphong
I thought AP-25 was old. Good luck!
Electronics Forum | Fri Sep 22 13:03:26 EDT 2006 | daxman
I ran the vision test...here is what I got. Camera System: Completed Repeatability VX mean = -3.177942 Standard Deviation = .000059 VY mean = -12.114077 Standard Deviation = .000065 Vision System: Completed Repeatabi
Electronics Forum | Tue Jul 27 19:02:46 EDT 2004 | pdeuel
Not an easy task and requires calibration jig. MPM support field service is your best bet. The adjustment screws for the prizm located on left side of camera will adjust the x direction. There is a set screw on the front that must be loosened first.
Electronics Forum | Thu Oct 15 05:00:23 EDT 2009 | taus
Hello, Thanks for the comments! The problem is solved, I was browsing this forum and found a topic referring to AP.CAL. Than I realized that the person that worked with the machine before me, altered this file. The values were all altered but he k
Electronics Forum | Mon Oct 20 15:28:22 EDT 2014 | island2013
We've got a set of manuals here for the AP series. If you would like to borrow them email me.