Electronics Forum | Tue Jan 04 10:05:41 EST 2011 | ev
Checked that out but all fans are running. It seems to be a heat issue. I was able to get it going the next time I started a shift.
Electronics Forum | Tue Jan 04 14:06:58 EST 2011 | cyber_wolf
First I would confirm that both of your X-motors and transducers are working through the service menu. After that start looking at the big power booster on the back of the machine.
Electronics Forum | Tue Jan 04 15:11:57 EST 2011 | ev
The Xmotor tests just confirms that the hardware did not initialize.....unless I am looking at the wrong menu. I have external fans on the booster board and the X motor on the back of the machine as well as one blowing directly into the computer box
Electronics Forum | Thu Jan 06 13:56:46 EST 2011 | ev
Thanks for this detail. The X wagon responds as per the instructions here so I'll give the cables a good inspection.
Electronics Forum | Fri Oct 29 17:48:46 EDT 2021 | artem
Hello, I have found the problem. The capacitors on the PAIB board were leaking. They have even demaged some traces and vias on the PCB and the -5V supply on the PAIB board was not working anymore. Got it working again :)
Electronics Forum | Thu Jul 18 17:41:31 EDT 2019 | rgduval
The UFP was a designation for "ultra-fine-pitch"; but, for the most part, you should be able to get the same placements out of both machines. Anything 0402 or above can be mechanically centered. The UFP machine will lean on optical centering for .5
Electronics Forum | Thu Jul 20 07:40:56 EDT 2006 | ev
I have a TP11 UFP without the hydra option and have had difficulty keeping it running. The latest problem is a hardware iniation problem which in the past was a PAIB board failure which I replaced about one year ago almost to the day. Has anyone seen
Electronics Forum | Thu Dec 30 16:41:48 EST 2010 | dyoungquist
Hi Ev, We are running a TP9-2 which should be very similar to your TP11-UFP. I need a little more information to be able to help. Is it failing on the initialize hardware step? Or is it a different point in the start up sequence that it fails? Wha
Electronics Forum | Wed Jul 17 18:00:37 EDT 2019 | rgduval
Generally, the machines can place the same types/sizes of components. The advantage with the 11 is that you can have more magazines loaded with more components, and build larger assemblies more efficiently. The -9, though, will get you through near
Electronics Forum | Thu Jul 18 17:06:19 EDT 2019 | spoiltforchoice
I can't imagine anything more tedious than continuously swapping feeders during a build (unless your panels are 10mins++) and the very suggestion this was a good idea when were were looking at MY's was comical to me. You should expect all TP series