Electronics Forum | Thu Jul 07 07:27:10 EDT 2005 | buchi79
Are you buying nozzles from UIC or other vendor? By the way, what is the component you rejecting? Is it happening to random component or specific one?
Electronics Forum | Wed Jul 27 12:50:59 EDT 2005 | mnguyen
You may want to look at which spindle that is dropping the nozzle and check the O-ring on the spindle head. It's probably bad, cracked, or broken. Replace it and that will fix it
Electronics Forum | Mon Jul 09 15:34:40 EDT 2007 | dilogic
Yep, I've learned the lesson the hard way - you can't start GSM with no nozzles on heads ;-). I've discovered after I posted the question. Thanks anyway... - Deni
Electronics Forum | Wed Feb 24 09:17:47 EST 2010 | dilogic
I was wondering what are main benefits of using hypodermic or multiport nozzles with GSM Flex heads? Can't find any relevant information about the topic. Can anyone share his experience? - Deni
Electronics Forum | Thu Nov 03 16:57:16 EDT 2022 | spacecase
I did clean the nozzles, but some of them are older so I will check and swap out with better looking ones. Thank you for the response, troubleshooting seems to be the main part with these things
Electronics Forum | Tue Jul 05 16:29:27 EDT 2005 | stepheniii
The air kiss is to replace the vacuum with air so the part will drop off the nozzle. Every machine I've seen with Air kiss, uses it when discarding a part as well as when placing a part. The air kiss should not be strong enough to blow the nozzle off
Electronics Forum | Thu Nov 03 02:16:55 EDT 2022 | spacecase
Hey I'm having an issue with a samsung 421f component placer. The machine is fine on the first 5 boards then on the 6th or so it just throws them wherever. The problem is the smallest flat components start sticking to the nozzle even after hitting th
Electronics Forum | Fri Nov 04 12:49:46 EDT 2022 | ibtonystark
Nice Lexmark Service Centers in Alabama
Electronics Forum | Mon Jul 04 11:32:44 EDT 2005 | geb
One of my Universal GSM (1995/ 1996 model) pick and place machines has recently started to drop the nozzle on the reject belt when dropping off a rejected component. I have tried replacing the nozzel holders on the ends of the spindles but with no im
Electronics Forum | Fri Jan 04 14:31:35 EST 2013 | tombstonesmt
Thank you guys. I will check this stuff out. It > quite possibly could be something we have done > wrong. Thanks again for the feedback Add anti seize to the threads. We do this to all of our nozzles when we first "tin" them with Active8. We usua
We offer various kinds of high quality SMT nozzles, feeders, cutters, filters, etc. Sales1@kundasmt.com
Equipment Dealer / Broker / Auctions
Room 208 haochen building #286 dongping Industry Zone
Suzhou, 04 China
Phone: 0086-512-68364089
winsouce.jpg)
