Electronics Forum | Tue Oct 09 16:25:26 EDT 2001 | meowen
Unfortunately 95% of our runs require both sides of our Universal HSP's. We also have carts that hold one carriage worth of feeders on each side. Parts that carry over from one product to the next are flagged and relocated in the machine per the ne
Electronics Forum | Wed Mar 29 17:10:25 EST 2000 | Jon Wentz
Hi Dave, What feeder model do you have? I took a quick look in my parts list manual and again, depending on your feeder model, you might be able to buy the needed part(s) from Zevatech/Juki. Have you checked with them yet? For example, the main feed
Electronics Forum | Tue Oct 09 14:59:52 EDT 2001 | slthomas
That's what we do with our MSHII's...setup one carriage offline while the other one runs. We also have setup carts to load the feeders ahead of time and haul them out to the lines. Of course, when we exceed the carriage capacity of 75 slots for an
Electronics Forum | Fri Oct 01 00:49:33 EDT 2010 | darrenj
Yes, we have the Agilis stick feeder and it is a definite improvement on the vibe. It usually comes with a set of starter 'tubeforks', but i bought another starter set after a while since the individual tubeforks are relatively expenisive. Always g
Electronics Forum | Thu Jan 31 08:51:31 EST 2008 | tonyamenson
I just made a more in depth query on the floor and what I thought was one issue is many many issues. We are hadn placing parts that came in bulk instead of tubes, another issue is the vision system won't register teh part corrrectly, another is the
Electronics Forum | Wed Apr 02 17:52:41 EDT 2008 | fsw
Sr. Tech, We have a IP III on one of our lines. We were hand placing an Samtec SMT connector MMT-108-01-T-DH series. I asked our SMT tech to get the IP to place it & he said we need tabs on the connector. So we got the "tab" version. Now he is not a
Electronics Forum | Fri Aug 31 04:55:50 EDT 2018 | sophyluo1985
Hi Karl, We also supply YAMAHA and JUKI parts. Our website is : Http://www.goldlandsmt.com Once you need, we can quote to you for your reference. ok? Have a nice day! Sophy GoldLand Electronic Technology Co., Ltd 88#, Nan Ling Road, Xin Qiao, Sha J
Electronics Forum | Fri Jan 14 15:46:50 EST 2000 | g cronin
is there any tape feeders for the GSM that have adjustable pitch and/or width?? I thought I heard of a "Universal" Universal feeder.. If so what is the part numbers thanks
Electronics Forum | Wed Apr 02 14:24:35 EDT 2008 | mulder0990
That was something sitting in the back of my minD. Thanks for the part number. Now I have to ask, does anyone have an aftermarket place for operators that treat the feeders well? I am in need of a few of them
Electronics Forum | Tue Apr 03 08:34:38 EDT 2012 | thanh
REAR, NEXT TO TABLE UP AND DOWN. CHANGE FEEDER SET UP TO FIX TRAY. MAKE SURE YOU HAVE CORRECT NUMBER OF X,Y COMPONENTS IN TRAY AND NUMBER OF TRAY FOR THE PART.