Electronics Forum | Mon Feb 14 05:58:06 EST 2011 | vinitverma
Gabe, You now need to teach the Datum position for the front feederbar and for the rear feederbar too. If I'm not mistaken the datum position for the front feederbar is position no. 21. Just put a feeder on position no. 21 and use the camera to find
Electronics Forum | Tue Oct 18 14:24:25 EDT 2005 | Don Swenson - Honeywell
Are there any studies that document the benefits of positive etchback? Does positive etchback, particularly plasma, improve PWB reliability?
Electronics Forum | Wed Sep 19 11:40:18 EDT 2012 | dekhead
Not true... with manual screen load machines (LT / Horizon), you need to ascertain the correct position / measurement and can load to that position. Auto load machines there is a "custom screen" setting which is used to tell machine the position ("Di
Electronics Forum | Tue Nov 20 18:56:19 EST 2018 | dekhead
If always on... you will need to write product file as edge justified, and position stencil properly before auto-clamping takes place. If always off... you will need to write product file as center justified... and position stencil and acknowledge st
Electronics Forum | Mon Dec 11 20:34:35 EST 2000 | Dave F
I sometimes get "fuzzy" on how different companies differentiate between the activities and responsibilities of various positions. [Read: I don't understand the difference between a manufacturing engineer and a process engineer] Regardless, I'd get
Electronics Forum | Fri Jun 10 18:44:28 EDT 2005 | Frank
This depends on how the software of your particular machine was written (designed) to handle local fids. Most machines do not have a requirement about the position of the local fids. The purpose of local fids are the same as global fids. All the p
Electronics Forum | Fri Oct 09 06:53:10 EDT 2009 | taus
Hello, I've recently started to work with MPM AP25, I began doing maintenance to get to know the machine. But now I'm having some problems in the teaching process. You can see the problem in the photo. http://img59.imageshack.us/i/image194p.jpg/
Electronics Forum | Sat May 29 02:20:08 EDT 2010 | vinitverma
Mch Adjust > Adjust Target > Laser Unit > Nozzle Position. Here the laser will automatically detect the centre of the nozzle. Remember - It'll give you the option of using a component for the test but DON'T use any component. Let it detect the centre
Electronics Forum | Tue May 24 05:21:32 EDT 2005 | Zsolt
did you try it with different product/programs? if not, then please try. It could be a mistyped placing position also. Is there any error code? Could be several reasons but I think servo amplifier or servo motor could be the cause. More info would be
Electronics Forum | Tue Aug 02 11:17:27 EDT 2005 | Stefan
Tape feeders usually have a fixed pick position regardless of the package size. Is the component body off center in the tape pocket? I hope you can enter an offset in the feeder set up file. Also, perforation holes can deform, if the reel is too hea