Electronics Forum | Fri Jun 10 21:22:36 EDT 2005 | KEN
JD, fiducials are merely land marks. The vision processor will measure the actual location and compare it to the CAD location. It does not care if the design is symetrical, asymetrical or what. In the case of a single center design fiducial (which
Electronics Forum | Thu Jun 23 13:43:29 EDT 2005 | Stefan
I fear your files are not stored in the default directory or your hard drive is full. Boot with a DOS boot disc and check your C drive for program and fiducial information. Try an older program to check if the program structure and vision informatio
Electronics Forum | Sat Jan 14 08:13:14 EST 2006 | gipos Mike
We are doing a lot of CSP-BGA rework with tacky flux from Senju Metal.Their flux is very good.We are buying directly from Japan 529D flux. We have reworked BGA processor plastic sockets of Fujitsu Laptops. What kind of flux you are using? Not all of
Electronics Forum | Wed Jun 17 17:26:26 EDT 2009 | bandjwet
We are having to put an Intel Core 2 Duo Solo mobile processor in a 478-pin micro FCPGA package into a ZIFF socket. The devices currently only have lands (device rework) and we would like to attach the pins. Does anyone know the material compositio
Electronics Forum | Tue Feb 05 19:00:18 EST 2013 | marcelorotofrance
I found problem, it was a faulty connector on the align processor card. So, Mr. Bobpan, I thank you very much for your invaluable guidance. P.S. My employer has been very clever and have purchased a 18 years old/ 25000 run hours/ third-hand equipmen
Electronics Forum | Sat Apr 10 00:19:06 EDT 2021 | mi123ms
I just purchased an Assembleon Sapphire machine and am new to Assembleon machines, and on startup it states "Download Vision Data NG", does this mean the processor board can't download the vision data to the vision board? I have spare boar
Electronics Forum | Wed Sep 22 03:46:02 EDT 2021 | zxcvb
Hi all, I bought a PT2399 delay after reading a detailed introduction article about this device, here's the link:https://www.apogeeweb.net/circuitry/pt2399-delay-features-datasheet-application-circuit.html It says that BU9253 is the alternative of PT
Electronics Forum | Sun Jul 09 09:54:21 EDT 2023 | recard
Hi guys. Maybe it helps someone. We solved almost all issues on our machine with changing the capacitors arround the processor on our motherboard. We first suspect the Power supply and decided to use two power supplies, one for the MB and the other o
Electronics Forum | Mon Sep 24 20:34:46 EDT 2012 | saduquette
Hi All, I have a Quad 4C that the quadalign processor started acting up on. Where the Hand Held Progrmmer would hang at "Laser Align Init" when you first turn the machine on. A couple of times I was able to get it running by pressing the re
Electronics Forum | Wed Feb 16 05:09:30 EST 2000 | Dean
You might try a no HASL spec on your fids...but shelf life may hamper copper quality. Not a pleasant situation...opertors tend to polish the fids with erasers to compensate but this leads to eraser "bits" in your equipment and your solder! Maby op