Electronics Forum | Mon Jan 21 10:21:12 EST 2013 | bobpan
Glad you got it working...if I had worked on them in the last 15 years i might of remembered some of the questions you were asking me a little better. But...hey....its working....thats all that counts.
Electronics Forum | Fri Jul 19 16:27:38 EDT 2013 | microaide
I think I have the vision problems figured out. There were two problems. 1) The Alignment type was set to "Small" for my TQFP48 part. It should have been set to "Complete". This is a clear case of poor documentation. The AutoProgram manual lists the
Electronics Forum | Thu Jan 19 12:16:46 EST 2012 | leemeyer
I read back through your post. It seems that you do not have bases that belong with the 4C machine. I think that you have bases for Q series machines. That would explain why the connectors don't fit. You say that there are blocks on the feeder base.
Electronics Forum | Mon Jul 22 05:03:45 EDT 2013 | bobpan
That documentation was written 20 years ago and was meant to be a reference for the software. To use autoprogram...engineers would take a 3-5 day class. It simply was not supposed to be learned from a manual.
Electronics Forum | Thu Mar 02 04:24:46 EST 2006 | walbone
Hi, We have recently purchased a Quad IVC 115 pick and place machine but are finding it difficult to place SOT23 and similar components. The Visual alignment system rejects the components. We have manually measured and also got the system to measure
Electronics Forum | Fri Sep 06 10:27:42 EDT 2013 | nophsem
Hi bobpan! MOD CODE 69 is "Waffle Tray Handler Installed Flag" and default setting 0. That's what mode code quick reference table says (the reference table that I've to respect according to the previous owner). And it's different what manual says (M
Electronics Forum | Wed May 04 21:32:30 EDT 2011 | jimlas53
Thanks for the answer, RLM, I couldn't find anything in the manual that was helpful. If I use a common extent for each component type, I need to identify those components that may be turned due to the feed type (tape, vibe). Is this where I would d
Electronics Forum | Wed Feb 11 08:33:25 EST 2015 | daniel_esposito
Hi, I have two Quad IVc and both of them have the same problem. Laser Alignment is not working! When I run funtion 30, it always gives 1 at nozzle height. If I place any object beside the nozzle, it will give a number different from one depend on how
Electronics Forum | Mon Jan 21 06:04:12 EST 2013 | bobpan
Some things to try.....keep in mind it has been over 10 years since i programmed one of those machines. 1. Tep Vision is what you should be using. I think it was called tep vpass in older software. 2. Maybe try goto 0 instead of goto 1. 3. Make sure
Electronics Forum | Wed Jun 19 07:24:10 EDT 2013 | bobpan
Hello Rollon, There needs to be a contrast between the sticker and board. The manual gives and example of a round red sticker. If you still cant still make this work.....Do the following. Run the machine and after it finds fiducials press stop on the