Electronics Forum | Tue Feb 17 13:47:33 EST 1998 | Chrys Shea
| I am currently evaluating some different reflow ovens | for a future purchase. The manufacturers we are | looking at are Conceptronic, BTU, and Heller. Any | feedback on these manufacturers would be welcome. | I am particularly interested in: | 1
Electronics Forum | Thu Jan 26 12:46:53 EST 2017 | dyoungquist
We run double sided boards that have large SMT electrolytic caps on the top side using the same profile for both sides. The trick is to do the bottom side first, then the top side. That way you do not need to glue down the large caps.
Electronics Forum | Tue Jan 31 08:28:29 EST 2017 | emeto
That is why we don't care if it is Top or Bottom. We call them first (process) side and second (process) side. Often you will have tall and heavy parts on both sides, so you will have to glue them.
Electronics Forum | Mon Aug 13 13:00:49 EDT 2012 | graememurphy
The problem was that the wiring between the overtemperature capillary thermostats had burnt away. There are eight of these, four on the bottom half and four on the top half of the heat chamber. A rubber blanking grommet covers the adjustment shaft of
Electronics Forum | Thu Feb 19 22:17:15 EST 1998 | Brian Morgan
| | I am currently evaluating some different reflow ovens | | for a future purchase. The manufacturers we are | | looking at are Conceptronic, BTU, and Heller. Any | | feedback on these manufacturers would be welcome. | | I am particularly interest
Electronics Forum | Wed Jan 25 00:29:22 EST 2017 | cmarasigan
This is our practice already, common profile both sides and we perform it during NPI stage. As long as zone settings are the same and profile requirements are meet, we consider it as same profile and no need to re-profile from bottom side process to
Electronics Forum | Wed Feb 25 02:50:33 EST 1998 | Scott McKee
| I am currently evaluating some different reflow ovens | for a future purchase. The manufacturers we are | looking at are Conceptronic, BTU, and Heller. Any | feedback on these manufacturers would be welcome. | I am particularly interested in: | 1
Electronics Forum | Thu Mar 05 16:54:53 EST 1998 | Brian Stumm @ ETS, LLC
Not sure if you are open to looking at additional vendors but if you are we would love to compete for your business. Go to our web site then call or e-mail me for additional information. Sincerely, Brian Stumm Thermal processing consultant Reflow an
Electronics Forum | Mon Mar 26 08:52:19 EDT 2007 | realchunks
Hi J, Yes, we do too. Funny thing is I was just looking at this last Friday. We call it sharing the bottom of the barrel. Typically it's just Process Engineers stuck down here, but from time to time, Maintenance gets stuck down here too. When in
Electronics Forum | Fri Nov 12 13:07:45 EST 2010 | G8reflow
Hi, The focal point of my research has been to recommend a reflow oven and develop a process for a small to low-medium production SMT soldering with the following considerations. - Lead-Free - Low to low-medium production - Forced Convection reflow
.gif)
winsouce.jpg)
