Electronics Forum | Tue Nov 01 16:09:38 EDT 2022 | kamedatec
The machine had the Auto Tray installed but was removed to put here in the company because the machine was bigger than my elevator. The owner told me it was working, which made me waste time testing all possible settings, electronic cards and cables.
Electronics Forum | Thu Jun 06 07:53:51 EDT 2002 | Jim M.
Has anyone had much luck Picking and Placing die with a Panasonic MPA-G3?What special setups or considerations are required? Currently we pick and place one die with our Universal GSM using only one nozzle. The nozzle must be painted white in order
Electronics Forum | Wed Oct 25 11:25:12 EDT 2017 | paddyronan
Hi all, I have a recent issue with an IP3 machine. The machine cycles through normal power up routine. Then the video monitor and VME card shit themselves down and after a couple of minutes the CPU board powers down. However this is intermittent. Wh
Electronics Forum | Tue Feb 23 21:22:39 EST 2021 | stephendo
The knockoffs are not as bad as the engineered ones. Anything that would add cost is missing. For example removable panels for easy access. current limiting on servos. etc. Rev. 1 software anywhere in the world is bad. But in China they seem to th
Electronics Forum | Mon Apr 25 01:11:56 EDT 2016 | devil2
Packers andIs Residential Relocation With Expert Removal Agencies Expensive? Movers Bangalore http://www.shiftingexpert.in/packers-and-movers-bangalore.html Packers and Movers Hyderabad http://www.shiftingexpert.in/packers-and-movers-hyderabad.html
Electronics Forum | Thu Apr 08 19:32:52 EDT 1999 | Tom Reilly
FYI, Yes, it is true SMT Plus [ http://www.smtplus.com/ ]does not meet IPC 782 standards but is that the goal here or to meet IPC-A-610 standards for manufacturing? I agree that patterns do cause some problems if created to maximum IPC standards but
Electronics Forum | Thu Sep 19 11:14:45 EDT 2002 | Jim M.
We had lots of problems with bridging on 15.8mm pitch, QFP17-160 at the start.The board was .032 thick, double sided-six boards to a panel. Here is the problems (not neccessarily in the biggest to little but as i remember them) and solutions that he
Electronics Forum | Wed Apr 11 17:00:28 EDT 2012 | rodrigo
Hi all, Our cp4 moves rather violently (jerks) all axis when the reset sw is pressed after power up. I've got all sorts of errors after boot up: Servo amp error: D,X,Y, etc Overtravel D,X,Y, etc D clutch error, power off machine We've checked all
Electronics Forum | Mon Apr 16 10:48:58 EDT 2012 | cyber_wolf
Sounds like a bad or out of adjustment servo amp.....
Electronics Forum | Mon May 16 15:53:17 EDT 2005 | adrian_nishimoto
This has been a problem with new components coming directly from vacuum sealed desiccant packed moisture barrier bags with moisture level cards. We have also baked all boards prior to the BGA rework to ensure no moisture issues were addressed.