Electronics Forum | Thu Apr 20 09:26:10 EDT 2006 | amol_kane
I am using Silicone based boots with SR coating with good results. I Use Vinyl and Rubber boots with AR and UR coatings.
Electronics Forum | Thu Jun 07 16:12:36 EDT 2001 | csullivan
Does anyone know of a good masking material for conformal coating? The coating is silicon based. Any help would be greatly appreciated. Thanks
Electronics Forum | Mon Aug 25 14:55:51 EDT 2008 | grics
I have a question for the manufacturing masters... We are going to start running test trials/DOE of a Urethane Coating (Humiseal 1A33) and I am not sure what to expect. From what I understand, urethane coating is pretty difficult to work. It is supp
Electronics Forum | Fri Jan 26 13:26:30 EST 2007 | rw
We are developing a new product that requires conformal coating on the motor controller. We selected a silicone based conformal coat due to its ease of use. There has been disagreement among engineers as to its impact on the motor. We have contact
Electronics Forum | Mon Jun 18 11:17:40 EDT 2001 | Howie
The adhesive type is the problem generally - latex adhesives used are not compatible with the silicone. Humiseal offer silicone compatible tapes & dots although they are quite expensive. I found a 3M product which is compatible with silicone based co
Electronics Forum | Wed Apr 19 16:43:05 EDT 2006 | samir
Silicone-based coatings "repel" most foreign,non-compatible materials like peelable solder mask, and rubber or vinyl boots. The result is, uncured material around the vicinity of where the boot was. Trust me. Been there and done that. As a rookie
Electronics Forum | Mon Dec 08 16:47:50 EST 2008 | pwilson1
Hi All, Does anyone know of a method (automated if possible) for removing cured Conformal Coating, silicone based, from plastic?? I m looking into a method of cleaning our internal packaging (mainly plastic boxes etc), which have cured sil
Electronics Forum | Thu Nov 15 11:30:17 EST 2007 | mt396596
Could anyone recommend an esd safe masking tape for conformal coating that does not use a silicone based adhesive? I have looked into 3M's 7419 series and am awaiting samples, curious if there is another brand out there people have used. Thank you
Electronics Forum | Thu Feb 11 12:02:47 EST 2010 | plaiming
We have temporarily switched to an RTV for the vibration reincforcement, but it is not compatible with acrylic conformal coating and we really do not want to switch conformal coatings to a silicone based. Additionally we are testing the product in h
Electronics Forum | Tue Nov 15 14:31:59 EST 2005 | Samir Nagheenanajar
Back in the days when I was in charge of a Paintline Dip conformal coater, I had the same issue with a non-hermetically sealed Potentiometer. We tried to use rubber boots, but the capillary/wicking action of our silicone-based heat cured coating was
