Electronics Forum | Wed Sep 11 20:47:50 EDT 2013 | action_101
I forgot to mention the new vcd and radials go for around $230,000 each with only 20 stations. You can buy nice used vcd8 and rad8's between $60,000-$75,000.
Electronics Forum | Thu Sep 12 11:27:21 EDT 2013 | rway
Yes. Typically terminals, large relays, displays, parts with mounted heatsinks. This is typically what you see on hand-insertion lines. Other parts with specialized packaging may not be able to be auto-inserted either. Most axial and radial leade
Electronics Forum | Thu Sep 12 15:51:29 EDT 2013 | gregp
Hi Dean, Thanks for the feedback. I suppose I should reveal the nature of my query. Contact Systems was founded by my father back in 1970. I worked there from 1983 until we closed the doors back in 2009. I acquired the assets and intellectual pro
Electronics Forum | Thu Jul 23 19:04:24 EDT 2020 | robl
The modular inserters usually have them built into the feeders, which is part of why each feeder is so expensive. I'm sure I saw one system with a separate clinch unit but they are all dog slow compared to a rad 5 or 8 or 6241D+.
Electronics Forum | Thu Jul 23 19:13:24 EDT 2020 | charliedci
Yes, my research and feedback from one supplier in particular is that their feeders can preform, cut and clinch (although I'm not sure why you would need the clinch). We will be sending them a small kit to demonstrate to us (online) its capabilities
Electronics Forum | Fri Jul 24 02:56:45 EDT 2020 | wellmanrau
wellmanrau@yeah.net Email: wellman@htgdsmt.com">wellman@htgdsmt.com ; wellmanrau@yeah.net">wellmanrau@yeah.net Shenzhen HTGD Intelligent Equipment Co., Ltd. Website: http://www.htgdsmt.com" target="_blank">http://www.htgdsmt.com
Electronics Forum | Thu Oct 03 04:04:10 EDT 2002 | Bob Willis
SMTNet has a video tape and interactive CD ROM on Intrusive Reflow Soldering that you may want to check out. In addition there are some free inspection standards for pin in hole printing, placement and soldering available at http://www.dpmo-monitori
Electronics Forum | Fri Oct 04 12:02:53 EDT 2002 | mzaboogie
Hi Barry, One consideration that you may want to consider is the lead to hole ratio. The higher the ratio, the less solder is required to fill in the gaps and give you a fillet. Heat is a concern. You will need to ensure components will take the he
Electronics Forum | Tue Sep 10 10:38:12 EDT 2013 | rway
Most of the PTH components are manually inserted. Some are auto-placed by our UIC machine. The parts are preped before install, so there is no need to trim the leads afterwards. The boards go through wave solder. The UIC machine has a clincher on
Electronics Forum | Fri Nov 21 11:00:27 EST 2014 | gregp
Hi J_Dub (Joe), Thanks for the input. Sounds like some fairly densely populated through hole assemblies. 100 solder joints per board is up to 50 parts per board (I know you may have DIP's so it could be less than 50). 24 boards in a panel x 50 par
.gif)
